Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC24FJ256DA206-I/PT
Ver Detalle Hojas de datos

PIC24FJ256DA206-I/PT

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial control applications
  • Characteristics: High performance, low power consumption, large memory capacity
  • Package: TQFP-44
  • Essence: 16-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

  • Architecture: 16-bit
  • CPU Speed: Up to 16 MIPS
  • Flash Memory: 256 KB
  • RAM: 16 KB
  • Operating Voltage: 2.0V to 3.6V
  • Digital I/O Pins: 35
  • Analog Input Channels: 16
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 5
  • PWM Outputs: 4
  • ADC Resolution: 10-bit
  • Temperature Range: -40°C to +85°C

Pin Configuration

The PIC24FJ256DA206-I/PT microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD (Power Supply)
  2. VSS (Ground)
  3. AN0 (Analog Input 0)
  4. AN1 (Analog Input 1)
  5. AN2 (Analog Input 2)
  6. AN3 (Analog Input 3)
  7. AN4 (Analog Input 4)
  8. AN5 (Analog Input 5)
  9. AN6 (Analog Input 6)
  10. AN7 (Analog Input 7)
  11. AN8 (Analog Input 8)
  12. AN9 (Analog Input 9)
  13. AN10 (Analog Input 10)
  14. AN11 (Analog Input 11)
  15. AN12 (Analog Input 12)
  16. AN13 (Analog Input 13)
  17. AN14 (Analog Input 14)
  18. AN15 (Analog Input 15)
  19. AVSS (Analog Ground)
  20. AVDD (Analog Power Supply)
  21. VREF- (Reference Voltage Negative)
  22. VREF+ (Reference Voltage Positive)
  23. REFO (Reference Output)
  24. OSC1/CLKI (Oscillator Input/Clock Input)
  25. OSC2/CLKO (Oscillator Output/Clock Output)
  26. TMS (JTAG Test Mode Select)
  27. TCK (JTAG Test Clock)
  28. TDO (JTAG Test Data Out)
  29. TDI (JTAG Test Data In)
  30. PGC (Programming and Debugging Clock)
  31. PGD (Programming and Debugging Data)
  32. RB0/AN5 (Port B, Pin 0/Analog Input 5)
  33. RB1/AN6 (Port B, Pin 1/Analog Input 6)
  34. RB2/AN7 (Port B, Pin 2/Analog Input 7)
  35. RB3/AN8 (Port B, Pin 3/Analog Input 8)
  36. RB4/AN9 (Port B, Pin 4/Analog Input 9)
  37. RB5/AN10 (Port B, Pin 5/Analog Input 10)
  38. RB6/AN11 (Port B, Pin 6/Analog Input 11)
  39. RB7/AN12 (Port B, Pin 7/Analog Input 12)
  40. RB8/AN13 (Port B, Pin 8/Analog Input 13)
  41. RB9/AN14 (Port B, Pin 9/Analog Input 14)
  42. RB10/AN15 (Port B, Pin 10/Analog Input 15)
  43. RB11 (Port B, Pin 11)
  44. RB12 (Port B, Pin 12)

Functional Features

  • High-performance 16-bit CPU
  • Integrated peripherals for various applications
  • Low power consumption for energy-efficient designs
  • Large memory capacity for storing complex programs and data
  • Multiple communication interfaces for seamless connectivity
  • Analog input channels for sensor interfacing
  • Timers and PWM outputs for precise timing and control

Advantages and Disadvantages

Advantages: - High performance and low power consumption combination - Ample memory capacity for complex applications - Versatile communication interfaces for easy integration - Wide temperature range for industrial environments

Disadvantages: - Limited number of I/O pins compared to some other microcontrollers - Higher cost compared to lower-end microcontrollers

Working Principles

The PIC24FJ256DA206-I/PT microcontroller operates based on the Harvard architecture with a 16-bit CPU. It executes instructions at up to 16

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC24FJ256DA206-I/PT en soluciones técnicas

  1. What is the maximum operating frequency of PIC24FJ256DA206-I/PT?
    - The maximum operating frequency of PIC24FJ256DA206-I/PT is 16 MHz.

  2. Can PIC24FJ256DA206-I/PT be used for motor control applications?
    - Yes, PIC24FJ256DA206-I/PT can be used for motor control applications due to its integrated motor control peripherals.

  3. Does PIC24FJ256DA206-I/PT support USB communication?
    - Yes, PIC24FJ256DA206-I/PT supports USB communication through its integrated USB module.

  4. What are the available communication interfaces on PIC24FJ256DA206-I/PT?
    - PIC24FJ256DA206-I/PT supports various communication interfaces including SPI, I2C, UART, and CAN.

  5. Is PIC24FJ256DA206-I/PT suitable for battery-powered applications?
    - Yes, PIC24FJ256DA206-I/PT is suitable for battery-powered applications due to its low power consumption features.

  6. Can PIC24FJ256DA206-I/PT be programmed using C language?
    - Yes, PIC24FJ256DA206-I/PT can be programmed using C language with the MPLAB XC16 compiler.

  7. What are the available analog-to-digital converter (ADC) channels on PIC24FJ256DA206-I/PT?
    - PIC24FJ256DA206-I/PT has 16 ADC channels for analog input measurements.

  8. Does PIC24FJ256DA206-I/PT have built-in security features?
    - Yes, PIC24FJ256DA206-I/PT includes security features such as code protection and data EEPROM memory.

  9. Can PIC24FJ256DA206-I/PT be used in industrial automation applications?
    - Yes, PIC24FJ256DA206-I/PT is suitable for industrial automation applications due to its robust design and communication capabilities.

  10. What development tools are available for programming PIC24FJ256DA206-I/PT?
    - Development tools such as MPLAB X IDE and MPLAB ICD 4 in-circuit debugger are available for programming and debugging PIC24FJ256DA206-I/PT.