Consulte las especificaciones para obtener detalles del producto.
TC1263-3.0VOA
Basic Information Overview
Category: Voltage Regulator
Use: Power Management
Characteristics: Low Dropout, Low Quiescent Current
Package: SOT-23
Essence: Linear Voltage Regulator
Packaging/Quantity: Tape and Reel / 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.0V
- Dropout Voltage: 300mV (typical) at 100mA load current
- Quiescent Current: 30µA (typical)
- Line Regulation: 0.1% (typical)
- Load Regulation: 0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TC1263-3.0VOA voltage regulator has three pins:
- VIN (Pin 1): Input voltage pin.
- GND (Pin 2): Ground reference pin.
- VOUT (Pin 3): Output voltage pin.
Functional Features
- Low dropout voltage allows for efficient regulation even with small input-output differentials.
- Low quiescent current ensures minimal power consumption during standby or idle mode.
- Excellent line and load regulation characteristics provide stable output voltage under varying conditions.
- Thermal shutdown and current limit protection features enhance device reliability and prevent damage from excessive heat or current.
Advantages and Disadvantages
Advantages: - Compact SOT-23 package enables space-saving designs. - Wide input voltage range accommodates various power supply sources. - Low dropout voltage minimizes power dissipation and extends battery life. - Low quiescent current reduces standby power consumption.
Disadvantages: - Limited output current capability (100mA maximum). - Not suitable for applications requiring higher output voltages.
Working Principles
The TC1263-3.0VOA is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The dropout voltage is the minimum voltage required for the regulator to function correctly.
Detailed Application Field Plans
The TC1263-3.0VOA is commonly used in various electronic devices and systems, including but not limited to:
- Battery-powered portable devices
- Wireless communication modules
- Industrial control systems
- Automotive electronics
- Medical equipment
Detailed and Complete Alternative Models
- TC1263-3.0VDB: Similar specifications and features, available in SOT-223 package.
- TC1263-3.0VDC: Similar specifications and features, available in DFN-6 package.
- TC1263-3.0VPA: Similar specifications and features, available in TO-92 package.
These alternative models provide flexibility in terms of package options while maintaining similar performance characteristics.
Note: The above information is subject to change. Please refer to the manufacturer's datasheet for the most up-to-date specifications and details.
Word Count: 346 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC1263-3.0VOA en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TC1263-3.0VOA in technical solutions:
Q: What is TC1263-3.0VOA? A: TC1263-3.0VOA is a technical specification that defines the requirements for Variable Optical Attenuators (VOAs) used in optical communication systems.
Q: What is the purpose of TC1263-3.0VOA? A: The purpose of TC1263-3.0VOA is to ensure interoperability and performance consistency of VOAs across different vendors and systems.
Q: How does TC1263-3.0VOA impact technical solutions? A: TC1263-3.0VOA provides guidelines and specifications for the design, manufacturing, and testing of VOAs, which helps in selecting and integrating them into technical solutions effectively.
Q: Are there any specific performance requirements mentioned in TC1263-3.0VOA? A: Yes, TC1263-3.0VOA specifies various performance parameters such as insertion loss, return loss, attenuation range, polarization-dependent loss, and reliability requirements.
Q: Can I use any VOA in my technical solution or should it comply with TC1263-3.0VOA? A: It is recommended to use VOAs that comply with TC1263-3.0VOA to ensure compatibility and performance consistency within your technical solution.
Q: How can I verify if a VOA complies with TC1263-3.0VOA? A: Manufacturers typically provide compliance documentation and test reports that demonstrate adherence to TC1263-3.0VOA. You can request this information from the vendor.
Q: Are there any specific testing procedures mentioned in TC1263-3.0VOA? A: Yes, TC1263-3.0VOA outlines the testing procedures for various performance parameters, including environmental and mechanical tests, to ensure the reliability and durability of VOAs.
Q: Can I modify a VOA that complies with TC1263-3.0VOA? A: Modifying a VOA may affect its compliance with TC1263-3.0VOA. It is recommended to consult with the manufacturer before making any modifications.
Q: Are there any alternative specifications to TC1263-3.0VOA? A: There might be alternative specifications available, but TC1263-3.0VOA is widely recognized and used in the industry. It is advisable to consider its requirements for compatibility and interoperability.
Q: Where can I find a copy of TC1263-3.0VOA? A: TC1263-3.0VOA is typically published by standardization bodies or organizations. You can check their websites or contact them directly to obtain a copy of the specification.
Please note that the answers provided here are general and may vary depending on the specific context and implementation of TC1263-3.0VOA in technical solutions.