Consulte las especificaciones para obtener detalles del producto.
1N5913B G
Product Overview
Category:
The 1N5913B G belongs to the category of semiconductor diodes.
Use:
It is commonly used as a voltage regulator or rectifier in electronic circuits.
Characteristics:
- Forward Voltage: 1.5V
- Reverse Voltage: 100V
- Current Rating: 1A
- Fast Switching Speed
Package:
The 1N5913B G is typically available in a DO-41 package.
Packaging/Quantity:
It is usually packaged in reels, tubes, or bulk quantities, depending on the supplier.
Specifications
- Part Number: 1N5913B G
- Type: Zener Diode
- Voltage - Zener (Nom): 100V
- Power Dissipation (Max): 1.5W
- Impedance (Max) (Zzt): 10 Ohm
- Current - Reverse Leakage @ Vr: 5µA @ 80V
- Operating Temperature: -65°C ~ 200°C
Detailed Pin Configuration
The 1N5913B G typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.
Functional Features
The 1N5913B G acts as a voltage regulator by maintaining a constant output voltage across its terminals, even when there are variations in input voltage or load current.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Fast response time
- High reliability
Disadvantages
- Limited power dissipation capability
- Sensitive to temperature variations
Working Principles
When the voltage across the 1N5913B G exceeds its rated value, it starts conducting in the reverse direction, thereby regulating the voltage across its terminals.
Detailed Application Field Plans
The 1N5913B G is widely used in various applications such as: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting
Detailed and Complete Alternative Models
Some alternative models to the 1N5913B G include: - 1N746A - BZX84C100 - LM431ACM3X
In conclusion, the 1N5913B G is a versatile semiconductor diode that finds extensive use in voltage regulation and protection circuits due to its precise characteristics and reliable performance.
Word Count: 320
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 1N5913B G en soluciones técnicas
What is the 1N5913B G diode used for?
- The 1N5913B G diode is commonly used as a voltage regulator in various technical solutions.
What is the maximum forward current of the 1N5913B G diode?
- The maximum forward current of the 1N5913B G diode is typically 3 amperes.
What is the voltage rating of the 1N5913B G diode?
- The 1N5913B G diode has a voltage rating of 3.6 volts.
Can the 1N5913B G diode be used for reverse voltage protection?
- Yes, the 1N5913B G diode can be used for reverse voltage protection due to its characteristics.
What are the typical applications of the 1N5913B G diode?
- Typical applications include voltage regulation, overvoltage protection, and general purpose rectification.
Is the 1N5913B G diode suitable for high-frequency applications?
- The 1N5913B G diode is not specifically designed for high-frequency applications, but it can be used in certain low to moderate frequency circuits.
What is the temperature range for the 1N5913B G diode?
- The 1N5913B G diode typically operates within a temperature range of -65°C to +175°C.
Can multiple 1N5913B G diodes be connected in parallel for higher current applications?
- Yes, multiple 1N5913B G diodes can be connected in parallel to increase the overall current handling capability.
Does the 1N5913B G diode require a heatsink for certain applications?
- Depending on the specific application and power dissipation, a heatsink may be required to ensure proper thermal management.
Are there any common failure modes associated with the 1N5913B G diode?
- Common failure modes include overcurrent conditions, excessive reverse voltage, and thermal overstress, so proper design considerations should be taken into account.