Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
JANTX1N3326B
Ver Detalle Hojas de datos

JANTX1N3326B

Product Overview

Category

The JANTX1N3326B belongs to the category of semiconductor devices, specifically a Zener diode.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Reverse breakdown voltage stability
  • Low leakage current
  • High reliability

Package

The JANTX1N3326B is typically available in a DO-35 package.

Essence

The essence of the JANTX1N3326B lies in its ability to maintain a constant voltage across its terminals when operated in the reverse-biased mode.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Reverse Breakdown Voltage: 6.8V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +200°C
  • Forward Voltage: 1.2V (at 200mA)

Detailed Pin Configuration

The JANTX1N3326B has two pins, anode, and cathode, which are identified by the markings on the device.

Functional Features

  • Precise voltage regulation
  • Protection against voltage spikes
  • Stable operation over a wide temperature range

Advantages

  • Reliable voltage regulation
  • Low leakage current
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Higher cost compared to standard diodes

Working Principles

The JANTX1N3326B operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse biased.

Detailed Application Field Plans

The JANTX1N3326B finds applications in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N3326B include: - 1N4728A - BZX55C6V8 - 1N5226B

This comprehensive entry provides an in-depth understanding of the JANTX1N3326B, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de JANTX1N3326B en soluciones técnicas

Sure, here are 10 common questions and answers related to the application of JANTX1N3326B:

  1. What is the JANTX1N3326B diode used for?

    • The JANTX1N3326B is a high-reliability, military-grade silicon power rectifier diode commonly used in aerospace, defense, and other high-reliability applications.

  2. What are the key features of the JANTX1N3326B diode?

    • The JANTX1N3326B diode features a high surge current capability, low forward voltage drop, and high reliability under harsh environmental conditions.

  3. What are the typical applications of the JANTX1N3326B diode?

    • Typical applications include power supplies, inverters, converters, and other high-reliability electronic systems where ruggedness and reliability are critical.

  4. What is the maximum forward voltage of the JANTX1N3326B diode?

    • The maximum forward voltage at a specified forward current is typically around 1.1 volts.

  5. What is the maximum reverse voltage of the JANTX1N3326B diode?

    • The maximum reverse voltage is typically around 200 volts.

  6. What is the operating temperature range of the JANTX1N3326B diode?

    • The diode is designed to operate within a wide temperature range, typically from -65°C to +175°C.

  7. Is the JANTX1N3326B diode suitable for high-frequency applications?

    • While it can be used in some high-frequency applications, it is primarily designed for medium to high-power applications rather than high-frequency switching.

  8. What are the packaging options available for the JANTX1N3326B diode?

    • The diode is available in various package types, including axial lead, surface mount, and stud mount configurations.

  9. Does the JANTX1N3326B diode have any special handling or storage requirements?

    • It is recommended to store the diode in an environment with controlled humidity and temperature to maintain its reliability and performance.

  10. Is the JANTX1N3326B diode compliant with any specific industry standards?

    • Yes, the JANTX1N3326B diode is compliant with MIL-PRF-19500/538, which specifies the requirements for high-reliability semiconductor devices.

These questions and answers should provide a good overview of the JANTX1N3326B diode and its applications in technical solutions.