Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
JANTX1N4118DUR-1
Ver Detalle Hojas de datos

JANTX1N4118DUR-1

Product Overview

Category

The JANTX1N4118DUR-1 belongs to the category of semiconductor devices.

Use

It is commonly used as a high-reliability diode in various electronic applications.

Characteristics

  • High reliability
  • Low leakage current
  • Fast switching speed
  • High temperature operation

Package

The JANTX1N4118DUR-1 is typically available in a DO-35 package.

Essence

This diode is essential for providing reliable and efficient rectification and signal processing in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the manufacturer.

Specifications

  • Maximum Reverse Voltage: 75V
  • Average Rectified Current: 150mA
  • Forward Voltage Drop: 1V
  • Reverse Leakage Current: 5µA
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4118DUR-1 has two pins, anode, and cathode, which are identified by a band on the cathode side.

Functional Features

  • Reliable rectification of AC signals
  • Fast switching for signal processing
  • Low leakage current for improved efficiency

Advantages and Disadvantages

Advantages

  • High reliability
  • Low leakage current
  • Fast switching speed
  • Wide operating temperature range

Disadvantages

  • Relatively low maximum reverse voltage compared to some other diodes
  • Limited average rectified current capacity

Working Principles

The JANTX1N4118DUR-1 operates based on the principles of semiconductor junctions, allowing for the controlled flow of current in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The JANTX1N4118DUR-1 is commonly used in: - Power supplies - Signal rectification circuits - Switching circuits - Voltage clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4118DUR-1 include: - 1N4148 - 1N4001 - 1N5819 - 1N5399

In conclusion, the JANTX1N4118DUR-1 is a high-reliability diode with fast switching characteristics, making it suitable for various electronic applications. Its low leakage current and wide operating temperature range make it a preferred choice in critical circuits where reliability is paramount. However, its relatively low maximum reverse voltage and average rectified current capacity should be considered when selecting it for specific applications.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de JANTX1N4118DUR-1 en soluciones técnicas

  1. What is the JANTX1N4118DUR-1 diode used for?

    • The JANTX1N4118DUR-1 diode is commonly used for voltage regulation, signal demodulation, and switching applications in various technical solutions.

  2. What are the key specifications of the JANTX1N4118DUR-1 diode?

    • The JANTX1N4118DUR-1 diode is a silicon switching diode with a maximum repetitive reverse voltage of 75V, a forward current of 200mA, and a fast switching speed.

  3. How does the JANTX1N4118DUR-1 diode compare to other similar diodes?

    • The JANTX1N4118DUR-1 diode offers high reliability and performance under harsh environmental conditions, making it suitable for military and aerospace applications.

  4. Can the JANTX1N4118DUR-1 diode be used in high-temperature environments?

    • Yes, the JANTX1N4118DUR-1 diode is designed to operate reliably at elevated temperatures, making it suitable for applications in challenging thermal conditions.

  5. What are the typical applications of the JANTX1N4118DUR-1 diode in technical solutions?

    • The JANTX1N4118DUR-1 diode is commonly used in power supplies, voltage regulators, RF circuits, and precision instrumentation due to its fast response and low leakage current.

  6. Does the JANTX1N4118DUR-1 diode have any special packaging or mounting requirements?

    • The JANTX1N4118DUR-1 diode is available in various package types, including surface mount and through-hole, to accommodate different mounting and assembly methods.

  7. What are the potential failure modes of the JANTX1N4118DUR-1 diode?

    • The JANTX1N4118DUR-1 diode may experience failure due to excessive reverse voltage, overcurrent conditions, or exposure to extreme temperatures beyond its specified range.

  8. Is the JANTX1N4118DUR-1 diode suitable for high-frequency applications?

    • Yes, the JANTX1N4118DUR-1 diode exhibits fast recovery times and low capacitance, making it well-suited for high-frequency switching and RF applications.

  9. Are there any recommended operating conditions or limitations for the JANTX1N4118DUR-1 diode?

    • It is important to adhere to the specified maximum ratings for voltage, current, and temperature to ensure reliable operation and longevity of the JANTX1N4118DUR-1 diode.

  10. Where can I find detailed technical documentation and application notes for the JANTX1N4118DUR-1 diode?

    • Detailed technical specifications, application notes, and usage guidelines for the JANTX1N4118DUR-1 diode can be found in the manufacturer's datasheet and application support materials.