NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MC908MR32VFUE
Ver Detalle Hojas de datos

MC908MR32VFUE

Product Overview

Category: Microcontroller
Use: Embedded systems, automotive applications
Characteristics: High-performance, low-power consumption, compact size
Package: 32-pin QFN package
Essence: A microcontroller designed for automotive applications
Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 27
  • Timers/Counters: 4
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Communication Interfaces: UART, SPI, I2C
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MC908MR32VFUE microcontroller has a total of 32 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PTA0 - General-purpose I/O pin
  3. PTA1 - General-purpose I/O pin
  4. PTA2 - General-purpose I/O pin
  5. PTA3 - General-purpose I/O pin
  6. PTA4 - General-purpose I/O pin
  7. PTA5 - General-purpose I/O pin
  8. PTA6 - General-purpose I/O pin
  9. PTA7 - General-purpose I/O pin
  10. RESET - Reset pin
  11. PTB0 - General-purpose I/O pin
  12. PTB1 - General-purpose I/O pin
  13. PTB2 - General-purpose I/O pin
  14. PTB3 - General-purpose I/O pin
  15. PTB4 - General-purpose I/O pin
  16. PTB5 - General-purpose I/O pin
  17. PTB6 - General-purpose I/O pin
  18. PTB7 - General-purpose I/O pin
  19. PTC0 - General-purpose I/O pin
  20. PTC1 - General-purpose I/O pin
  21. PTC2 - General-purpose I/O pin
  22. PTC3 - General-purpose I/O pin
  23. PTC4 - General-purpose I/O pin
  24. PTC5 - General-purpose I/O pin
  25. PTC6 - General-purpose I/O pin
  26. PTC7 - General-purpose I/O pin
  27. VSS - Ground
  28. VDD - Power supply voltage
  29. XTAL - Crystal oscillator input
  30. EXTAL - Crystal oscillator output
  31. IRQ - Interrupt request pin
  32. VSS - Ground

Functional Features

  • High-performance 8-bit microcontroller suitable for automotive applications
  • Low-power consumption for efficient operation in battery-powered systems
  • Compact size and 32-pin package for space-constrained designs
  • Wide operating voltage range allows flexibility in power supply options
  • Multiple communication interfaces (UART, SPI, I2C) for seamless integration with other devices
  • On-chip analog-to-digital converter (ADC) for precise measurement and control
  • Robust timers/counters for accurate timing and event management

Advantages and Disadvantages

Advantages: - Specifically designed for automotive applications, ensuring reliability and compatibility - High-performance capabilities enable complex tasks to be executed efficiently - Low-power consumption extends battery life in portable systems - Compact size and 32-pin package offer flexibility in design layouts - Wide operating voltage range accommodates various power supply options

Disadvantages: - Limited flash memory and RAM capacity may restrict the complexity of applications - 8-bit architecture may not be suitable for certain demanding tasks requiring higher precision or processing power

Working Principles

The MC908MR32VFUE microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory, utilizing its CPU speed of up to 20 MHz. The microcontroller communicates with external devices through its various communication interfaces such as UART, SPI, and I2C. It can perform analog-to-digital conversions using its built-in ADC, enabling precise measurement and control. The timers/counters facilitate accurate timing and event management.

Detailed Application Field Plans

The MC908MR32VFUE microcontroller is widely used in automotive applications, including but not limited to:

  1. Engine control units (ECUs)
  2. Body control modules (BCMs)
  3. Anti-lock braking systems (ABS)
  4. Airbag control systems
  5. Climate control systems
  6. Instrument clusters
  7. Lighting control modules
  8. Powertrain control modules (PCMs)

Its compact size, low-power consumption,

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MC908MR32VFUE en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MC908MR32VFUE in technical solutions:

  1. Q: What is MC908MR32VFUE? A: MC908MR32VFUE is a microcontroller from the MC9S08MR family, specifically designed for automotive and industrial applications.

  2. Q: What are the key features of MC908MR32VFUE? A: Some key features include a 8-bit CPU core, 32KB flash memory, 2KB RAM, multiple communication interfaces, analog-to-digital converters, and timers.

  3. Q: What are the typical applications of MC908MR32VFUE? A: MC908MR32VFUE is commonly used in automotive systems such as engine control units (ECUs), body control modules (BCMs), and motor control applications in industrial settings.

  4. Q: Can MC908MR32VFUE be used in safety-critical applications? A: Yes, MC908MR32VFUE is suitable for safety-critical applications as it offers various features like built-in watchdog timer, low-voltage detection, and hardware breakpoints.

  5. Q: What programming languages can be used with MC908MR32VFUE? A: MC908MR32VFUE can be programmed using assembly language or high-level languages like C or C++ using appropriate development tools.

  6. Q: How can I program MC908MR32VFUE? A: MC908MR32VFUE can be programmed using a compatible in-circuit debugger/programmer connected to the microcontroller's debug interface.

  7. Q: Does MC908MR32VFUE support real-time operating systems (RTOS)? A: Yes, MC908MR32VFUE can be used with various RTOS options available in the market, enabling multitasking and efficient resource management.

  8. Q: Can MC908MR32VFUE communicate with other devices? A: Yes, MC908MR32VFUE supports multiple communication interfaces such as UART, SPI, I2C, and CAN, allowing it to communicate with other devices or systems.

  9. Q: What is the power supply voltage range for MC908MR32VFUE? A: MC908MR32VFUE operates within a typical power supply voltage range of 2.7V to 5.5V.

  10. Q: Are there any development tools available for MC908MR32VFUE? A: Yes, there are various development tools available from the manufacturer and third-party vendors, including integrated development environments (IDEs), compilers, and debuggers.

Please note that these answers are general and may vary depending on specific requirements and implementation details.