NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S9S08MP16E2MLFR
Ver Detalle Hojas de datos

S9S08MP16E2MLFR

Product Overview

Category

The S9S08MP16E2MLFR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Integrated peripherals for enhanced functionality
  • Wide operating voltage range
  • Small form factor

Package

The S9S08MP16E2MLFR is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of this microcontroller lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The S9S08MP16E2MLFR is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 40 MHz
  • Flash Memory: 16 KB
  • RAM: 1.5 KB
  • Operating Voltage Range: 1.8V - 3.6V
  • Number of I/O Pins: 16
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers/Counters: 4 x 16-bit, 2 x 8-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S9S08MP16E2MLFR has a total of 16 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage input
  2. VSS - Ground reference
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O pin
  13. PTB1 - General-purpose I/O pin
  14. PTB2 - General-purpose I/O pin
  15. PTB3 - General-purpose I/O pin
  16. PTB4 - General-purpose I/O pin

Functional Features

  • High-speed processing capabilities
  • Low power consumption for energy-efficient operation
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers/Counters for accurate timing and event counting
  • Flexible I/O pins for interfacing with external devices
  • Robust operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

  • Efficient processing performance
  • Low power consumption extends battery life
  • Versatile communication interfaces
  • Compact form factor for space-constrained designs
  • Wide operating voltage range allows compatibility with various power sources

Disadvantages

  • Limited flash memory capacity compared to higher-end microcontrollers
  • Relatively small number of I/O pins may restrict the number of external devices that can be connected

Working Principles

The S9S08MP16E2MLFR operates based on an 8-bit architecture, where instructions are executed sequentially. It utilizes a combination of hardware and software to perform various tasks. The microcontroller receives input from sensors or user interfaces, processes the data, and generates output signals accordingly. It interacts with external devices through its communication interfaces and controls the timing of events using timers/counters.

Detailed Application Field Plans

The S9S08MP16E2MLFR finds applications in a wide range of fields, including but not limited to:

  1. Consumer Electronics: Used in smart home devices, wearable technology, and remote controls.
  2. Industrial Automation: Employed in control systems, motor drives, and monitoring equipment.
  3. Automotive: Integrated into automotive electronics for engine control, dashboard displays, and safety systems.
  4. Medical Devices: Utilized in medical instruments, patient monitoring systems, and diagnostic equipment.
  5. Internet of Things (IoT): Enables connectivity and control in IoT devices such as smart sensors and actuators.

Detailed and Complete Alternative Models

  • S9S08MP16E1MLFR
  • S9S08MP16E0MLFR
  • S9S08MP16E3MLFR
  • S9S08MP16E4MLFR
  • S9S08MP16E5MLFR

These alternative models offer similar functionality and specifications, providing flexibility in choosing the most suitable microcontroller

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S9S08MP16E2MLFR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S9S08MP16E2MLFR in technical solutions:

  1. Q: What is the S9S08MP16E2MLFR microcontroller used for? A: The S9S08MP16E2MLFR microcontroller is commonly used in various technical solutions, such as industrial control systems, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the S9S08MP16E2MLFR? A: The S9S08MP16E2MLFR microcontroller supports a maximum clock frequency of 40 MHz.

  3. Q: How much flash memory does the S9S08MP16E2MLFR have? A: The S9S08MP16E2MLFR microcontroller has 16 KB of flash memory.

  4. Q: Can I expand the memory of the S9S08MP16E2MLFR? A: Yes, the S9S08MP16E2MLFR microcontroller supports external memory expansion through its memory interface.

  5. Q: What peripherals are available on the S9S08MP16E2MLFR? A: The S9S08MP16E2MLFR microcontroller includes various peripherals such as UART, SPI, I2C, ADC, PWM, and timers.

  6. Q: Does the S9S08MP16E2MLFR support low-power modes? A: Yes, the S9S08MP16E2MLFR microcontroller supports multiple low-power modes, including stop, wait, and low-leakage stop modes.

  7. Q: Can I use the S9S08MP16E2MLFR for real-time applications? A: Yes, the S9S08MP16E2MLFR microcontroller is suitable for real-time applications due to its fast interrupt response and deterministic timing.

  8. Q: What voltage range does the S9S08MP16E2MLFR operate on? A: The S9S08MP16E2MLFR microcontroller operates on a voltage range of 1.8V to 3.6V.

  9. Q: Is the S9S08MP16E2MLFR compatible with other microcontrollers or development tools? A: Yes, the S9S08MP16E2MLFR microcontroller is compatible with various development tools and software, including IDEs, debuggers, and programming interfaces.

  10. Q: Are there any application examples or reference designs available for the S9S08MP16E2MLFR? A: Yes, NXP provides application notes, reference designs, and example code that can help you get started with the S9S08MP16E2MLFR in different technical solutions.

Please note that these answers are general and may vary depending on specific requirements and configurations.