ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
CAT1163WI30
Ver Detalle Hojas de datos

CAT1163WI30

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout, high accuracy, low quiescent current
  • Package: SOT-23
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.0V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 50µA typical
  • Load Regulation: ±0.5% typical
  • Line Regulation: ±0.3% typical
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The CAT1163WI30 has the following pin configuration: - Pin 1: GND (Ground) - Pin 2: VOUT (Output Voltage) - Pin 3: VIN (Input Voltage)

Functional Features

  • Low dropout voltage allows for efficient regulation even with small input-output differentials.
  • High accuracy ensures precise output voltage regulation.
  • Low quiescent current minimizes power consumption in standby mode.
  • Excellent load and line regulation provide stable output voltage under varying conditions.

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources. - Small package size (SOT-23) facilitates space-constrained applications. - Low dropout voltage reduces power dissipation and extends battery life. - High accuracy ensures reliable performance in critical applications.

Disadvantages: - Limited output current capability (typically 100mA). - Higher cost compared to non-linear voltage regulators. - Requires external capacitors for stability.

Working Principles

The CAT1163WI30 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The dropout voltage is minimized by using a low resistance pass transistor.

Detailed Application Field Plans

The CAT1163WI30 is suitable for a wide range of applications, including: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

  1. CAT1163WI25: Similar specifications but with a lower input voltage range (2.5V to 5.0V).
  2. CAT1163WI33: Similar specifications but with a higher input voltage range (2.7V to 6.5V).
  3. CAT1163WI50: Similar specifications but with a higher output voltage range (1.8V to 5.0V).

Note: These alternative models provide flexibility based on specific application requirements.

Word count: 314 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de CAT1163WI30 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of CAT1163WI30 in technical solutions:

  1. Q: What is CAT1163WI30? A: CAT1163WI30 is a specific model of a digital programmable gamma correction device used in display applications.

  2. Q: What is the purpose of CAT1163WI30? A: The purpose of CAT1163WI30 is to provide accurate gamma correction for displays, ensuring optimal color reproduction and image quality.

  3. Q: How does CAT1163WI30 work? A: CAT1163WI30 works by adjusting the voltage levels of the RGB signals to compensate for the non-linear response of the display, resulting in improved color accuracy.

  4. Q: What types of displays can CAT1163WI30 be used with? A: CAT1163WI30 can be used with various types of displays, including LCDs, OLEDs, and other types of flat panel displays.

  5. Q: Can CAT1163WI30 be used in both consumer and industrial applications? A: Yes, CAT1163WI30 is suitable for both consumer and industrial applications where accurate color reproduction is essential.

  6. Q: Is CAT1163WI30 compatible with different communication interfaces? A: Yes, CAT1163WI30 supports various communication interfaces such as I2C, SPI, and SMBus, making it versatile and easy to integrate into different systems.

  7. Q: Can CAT1163WI30 be programmed to support custom gamma curves? A: Yes, CAT1163WI30 allows for programming custom gamma curves, enabling fine-tuning of color reproduction based on specific requirements.

  8. Q: Does CAT1163WI30 require external power supply? A: Yes, CAT1163WI30 requires an external power supply typically ranging from 2.7V to 5.5V, depending on the specific application.

  9. Q: Can CAT1163WI30 be used in battery-powered devices? A: Yes, CAT1163WI30 has low power consumption and can be used in battery-powered devices without significantly impacting battery life.

  10. Q: Are evaluation boards or reference designs available for CAT1163WI30? A: Yes, manufacturers often provide evaluation boards and reference designs to help developers quickly prototype and integrate CAT1163WI30 into their systems.

Please note that the answers provided here are general and may vary based on the specific implementation and datasheet of CAT1163WI30.