ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
NCP304LSQ46T1
Ver Detalle Hojas de datos

NCP304LSQ46T1

Product Overview

Category

NCP304LSQ46T1 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Wide input voltage range
  • Thermal shutdown protection
  • Overcurrent protection

Package

NCP304LSQ46T1 is available in a small outline package (SOP) with 6 pins.

Essence

The essence of NCP304LSQ46T1 lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 16V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV at 100mA load current
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)
  6. VREF (Reference Voltage)

Functional Features

  • High Precision Regulation: The NCP304LSQ46T1 provides accurate voltage regulation, ensuring stable output even under varying load conditions.
  • Low Dropout Voltage: With a low dropout voltage, this regulator minimizes power dissipation and maximizes efficiency.
  • Wide Input Voltage Range: The wide input voltage range allows for flexibility in various applications.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Overcurrent Protection: NCP304LSQ46T1 features overcurrent protection, safeguarding the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable output.
  • Low dropout voltage minimizes power dissipation.
  • Wide input voltage range provides flexibility in applications.
  • Thermal shutdown protection prevents damage due to overheating.
  • Overcurrent protection safeguards the circuit.

Disadvantages

  • Limited output voltage range (1.2V - 5.5V).
  • Higher quiescent current compared to some alternative models.

Working Principles

The NCP304LSQ46T1 operates based on a feedback mechanism. The feedback pin (FB) monitors the output voltage and compares it with a reference voltage (VREF). If the output voltage deviates from the desired value, the regulator adjusts the internal circuitry to maintain the set voltage level.

Detailed Application Field Plans

NCP304LSQ46T1 finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems - Communication equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to NCP304LSQ46T1 include: - LM317 - LT1083 - LM1117 - TPS7A47

These models provide comparable voltage regulation capabilities and can be considered as alternatives depending on specific requirements.

Word count: 439 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de NCP304LSQ46T1 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of NCP304LSQ46T1 in technical solutions:

1. What is NCP304LSQ46T1? - NCP304LSQ46T1 is a voltage supervisor and reset IC manufactured by ON Semiconductor.

2. What is the purpose of NCP304LSQ46T1? - The purpose of NCP304LSQ46T1 is to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold.

3. What are the key features of NCP304LSQ46T1? - Some key features of NCP304LSQ46T1 include low quiescent current, adjustable reset threshold, wide operating voltage range, and small package size.

4. How does NCP304LSQ46T1 help in technical solutions? - NCP304LSQ46T1 ensures that the microcontroller or other critical components in a system are properly reset when the power supply voltage drops below a safe level, preventing erratic behavior or data corruption.

5. What is the operating voltage range of NCP304LSQ46T1? - The operating voltage range of NCP304LSQ46T1 is typically between 0.8V and 5.5V.

6. Can the reset threshold be adjusted in NCP304LSQ46T1? - Yes, the reset threshold of NCP304LSQ46T1 can be adjusted using external resistors, allowing customization based on specific system requirements.

7. Is NCP304LSQ46T1 suitable for battery-powered applications? - Yes, NCP304LSQ46T1 is suitable for battery-powered applications due to its low quiescent current, which helps conserve power.

8. What is the typical quiescent current of NCP304LSQ46T1? - The typical quiescent current of NCP304LSQ46T1 is around 3µA, making it suitable for low-power applications.

9. Can NCP304LSQ46T1 be used in automotive applications? - Yes, NCP304LSQ46T1 is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring and reset functionality.

10. What is the package type of NCP304LSQ46T1? - NCP304LSQ46T1 is available in a small SOT-23-5 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.