ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
UC2843BDR2G
Ver Detalle Hojas de datos

UC2843BDR2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Mode PWM Controller
  • Characteristics:
    • High-performance current mode PWM controller
    • Wide input voltage range
    • Adjustable frequency and duty cycle
    • Overcurrent protection
    • Under-voltage lockout
    • Soft start capability
  • Package: SOIC-8
  • Essence: The UC2843BDR2G is a versatile voltage mode PWM controller designed for various power supply applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Input Voltage Range: 7V to 30V
  • Output Voltage Range: 0V to 5.1V
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Range: 50kHz to 500kHz
  • Maximum Duty Cycle: 100%
  • Quiescent Current: 17mA

Detailed Pin Configuration

The UC2843BDR2G has the following pin configuration:

  1. COMP: Compensation pin for external compensation network.
  2. CS: Current sense input pin for overcurrent protection.
  3. VFB: Feedback pin for regulating the output voltage.
  4. GND: Ground reference pin.
  5. RT/CT: Timing resistor/capacitor connection pin for setting the oscillator frequency.
  6. OUT: Output pin for driving external power MOSFET.
  7. VCC: Power supply input pin.
  8. REF: Reference voltage output pin.

Functional Features

  • Voltage mode control with adjustable frequency and duty cycle.
  • Overcurrent protection shuts down the output when the current exceeds a set threshold.
  • Under-voltage lockout prevents operation when the input voltage falls below a specified level.
  • Soft start capability gradually ramps up the output voltage during startup to prevent excessive inrush current.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile applications. - Adjustable frequency and duty cycle provide flexibility in power supply design. - Overcurrent protection enhances system reliability. - Soft start capability reduces stress on components during startup.

Disadvantages: - Limited output voltage range (up to 5.1V). - Requires external compensation network for stability.

Working Principles

The UC2843BDR2G operates as a voltage mode PWM controller. It compares the feedback voltage (VFB) with a reference voltage (REF) to regulate the output voltage. The error signal is amplified and used to control the duty cycle of the output waveform, which drives an external power MOSFET. By adjusting the timing resistor (RT) and capacitor (CT), the frequency of the oscillator can be set. The controller also incorporates overcurrent protection and under-voltage lockout features to ensure safe operation.

Detailed Application Field Plans

The UC2843BDR2G is widely used in various power supply applications, including:

  1. Switching Power Supplies: Used in AC-DC converters, DC-DC converters, and other power supply circuits.
  2. LED Lighting: Provides efficient control and regulation for LED drivers.
  3. Battery Chargers: Enables precise charging control for different battery chemistries.
  4. Motor Control: Used in motor drive circuits for speed control and power management.
  5. Audio Amplifiers: Provides power supply regulation for audio amplification circuits.

Detailed and Complete Alternative Models

  1. UC3843A: Similar voltage mode PWM controller with extended temperature range.
  2. UC3844B: Improved version with additional features like adjustable soft start and shutdown delay.
  3. UC3845C: Higher voltage rating and wider operating temperature range compared to UC2843BDR2G.
  4. TL494: PWM controller with similar functionality and pin configuration.

These alternative models offer similar functionality and can be used as replacements or alternatives to the UC2843BDR2G in various applications.

Word count: 540 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de UC2843BDR2G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of UC2843BDR2G in technical solutions:

  1. Q: What is UC2843BDR2G? A: UC2843BDR2G is a pulse width modulation (PWM) controller IC commonly used in power supply applications.

  2. Q: What is the operating voltage range of UC2843BDR2G? A: The operating voltage range of UC2843BDR2G is typically between 7.6V and 30V.

  3. Q: What is the maximum switching frequency of UC2843BDR2G? A: The maximum switching frequency of UC2843BDR2G is typically around 500kHz.

  4. Q: Can UC2843BDR2G be used in both buck and boost converter topologies? A: Yes, UC2843BDR2G can be used in both buck and boost converter topologies, as well as in flyback and forward converter configurations.

  5. Q: What is the purpose of the error amplifier in UC2843BDR2G? A: The error amplifier in UC2843BDR2G compares the feedback voltage with a reference voltage and generates an error signal to regulate the output voltage.

  6. Q: How does UC2843BDR2G provide overcurrent protection? A: UC2843BDR2G has a built-in current sense comparator that monitors the current flowing through the power MOSFET and shuts down the PWM if it exceeds a certain threshold.

  7. Q: Can UC2843BDR2G operate in continuous or discontinuous conduction mode? A: UC2843BDR2G can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM), depending on the load conditions.

  8. Q: What is the purpose of the soft-start feature in UC2843BDR2G? A: The soft-start feature in UC2843BDR2G gradually ramps up the output voltage during startup to prevent excessive inrush current and voltage overshoot.

  9. Q: Can UC2843BDR2G be synchronized with an external clock signal? A: Yes, UC2843BDR2G can be synchronized with an external clock signal by connecting it to the SYNC pin.

  10. Q: What are some typical applications of UC2843BDR2G? A: Some typical applications of UC2843BDR2G include switch-mode power supplies, LED drivers, battery chargers, and motor control circuits.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.