Rohm Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
BD8962MUV-E2
Ver Detalle Hojas de datos

BD8962MUV-E2

Product Overview

Category

BD8962MUV-E2 belongs to the category of integrated circuits (ICs).

Use

It is primarily used for voltage regulation and power management in electronic devices.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

BD8962MUV-E2 is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of BD8962MUV-E2 lies in its ability to efficiently regulate voltage and manage power consumption in electronic devices.

Packaging/Quantity

BD8962MUV-E2 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V - 18V
  • Output Voltage Range: 0.8V - 6V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOP-8

Detailed Pin Configuration

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. PG: Power good indicator
  8. VOUT: Output voltage

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Overcurrent protection safeguards against excessive current flow.
  • Thermal shutdown protection prevents overheating and damage to the device.

Advantages

  • High efficiency results in reduced power consumption and longer battery life.
  • Compact size enables integration into space-constrained electronic devices.
  • Wide input voltage range provides flexibility in power source selection.
  • Overcurrent and thermal protection enhance device reliability and safety.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • SOP package may require additional measures for heat dissipation in certain scenarios.

Working Principles

BD8962MUV-E2 utilizes a combination of switching and linear voltage regulation techniques to achieve efficient voltage regulation. It employs a feedback mechanism to continuously monitor the output voltage and adjust the internal circuitry accordingly.

Detailed Application Field Plans

BD8962MUV-E2 finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Digital cameras - Portable audio players

Detailed and Complete Alternative Models

  1. BD8963MUV-E2: Similar specifications with enhanced output current capability (5A).
  2. BD8964MUV-E2: Higher input voltage range (4.5V - 24V) with comparable output current (3A).
  3. BD8965MUV-E2: Lower power consumption and improved efficiency compared to BD8962MUV-E2.

(Note: The above alternative models are provided as examples and may not represent an exhaustive list.)

In conclusion, BD8962MUV-E2 is a versatile integrated circuit that offers efficient voltage regulation and power management capabilities. Its compact size, wide input voltage range, and protective features make it suitable for various electronic devices. While it has limitations in terms of maximum output current, there are alternative models available to cater to different requirements.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de BD8962MUV-E2 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of BD8962MUV-E2 in technical solutions:

  1. Q: What is BD8962MUV-E2? A: BD8962MUV-E2 is a specific model of voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What are the key features of BD8962MUV-E2? A: Some key features of BD8962MUV-E2 include high efficiency, low dropout voltage, wide input voltage range, and overcurrent/overtemperature protection.

  3. Q: What is the typical application of BD8962MUV-E2? A: BD8962MUV-E2 is commonly used as a power supply regulator in applications such as consumer electronics, industrial equipment, and automotive systems.

  4. Q: What is the input voltage range supported by BD8962MUV-E2? A: BD8962MUV-E2 supports an input voltage range of typically 2.5V to 18V.

  5. Q: What is the output voltage range provided by BD8962MUV-E2? A: The output voltage range of BD8962MUV-E2 can be adjusted from 0.8V to 15V.

  6. Q: Does BD8962MUV-E2 require any external components for operation? A: Yes, BD8962MUV-E2 requires external capacitors for stability and noise reduction. The datasheet provides recommended values.

  7. Q: Can BD8962MUV-E2 handle high current loads? A: Yes, BD8962MUV-E2 has a maximum output current capability of typically 2A, making it suitable for many applications with moderate power requirements.

  8. Q: Does BD8962MUV-E2 have any protection features? A: Yes, BD8962MUV-E2 includes built-in protection against overcurrent and overtemperature conditions, ensuring safe operation.

  9. Q: Is BD8962MUV-E2 available in different package options? A: Yes, BD8962MUV-E2 is available in various package options such as SOP-8 and HSOP-8, providing flexibility for different PCB layouts.

  10. Q: Where can I find more detailed information about BD8962MUV-E2? A: You can refer to the datasheet of BD8962MUV-E2, which provides comprehensive technical specifications, application notes, and recommended usage guidelines.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation provided by the manufacturer of BD8962MUV-E2.