Consulte las especificaciones para obtener detalles del producto.
BD95513MUV-E2
Product Overview
Category: Integrated Circuit (IC)
Use: Power Management IC for automotive applications
Characteristics: - High efficiency voltage regulator - Low power consumption - Wide input voltage range - Overcurrent protection - Thermal shutdown protection
Package: QFN (Quad Flat No-leads) package
Essence: The BD95513MUV-E2 is a power management IC designed specifically for automotive applications. It provides high efficiency voltage regulation, ensuring stable power supply to various components in the vehicle.
Packaging/Quantity: The BD95513MUV-E2 is available in a QFN package and is typically sold in reels of 2500 units.
Specifications
- Input Voltage Range: 4.5V to 40V
- Output Voltage Range: 1.0V to 20V
- Maximum Output Current: 3A
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The BD95513MUV-E2 has the following pin configuration:
- VIN: Input voltage
- GND: Ground
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage
- PG: Power good indicator
- SS: Soft-start control
- NC: Not connected
Functional Features
- High efficiency voltage regulation
- Overcurrent protection
- Thermal shutdown protection
- Power good indicator for output voltage monitoring
- Soft-start control for smooth power-up
Advantages
- Wide input voltage range allows compatibility with various automotive systems
- High efficiency reduces power consumption and heat generation
- Overcurrent and thermal shutdown protection ensure safe operation
- Power good indicator provides voltage monitoring capability
- Soft-start control prevents voltage spikes during power-up
Disadvantages
- Limited maximum output current of 3A may not be sufficient for high-power applications
- QFN package may require specialized equipment for soldering and rework
Working Principles
The BD95513MUV-E2 operates as a voltage regulator, converting the input voltage to a stable output voltage. It uses a combination of switching and control circuitry to achieve high efficiency and accurate voltage regulation. The overcurrent and thermal shutdown protection mechanisms ensure the safety and reliability of the device.
Detailed Application Field Plans
The BD95513MUV-E2 is commonly used in various automotive applications, including:
- Engine control units (ECUs)
- Infotainment systems
- Lighting systems
- Advanced driver-assistance systems (ADAS)
- Electric power steering (EPS) systems
Alternative Models
- BD95513MUV-E3: Similar specifications and features, but with enhanced overcurrent protection.
- BD95513MUV-F2: Higher maximum output current of 5A, suitable for more demanding applications.
- BD95513MUV-G2: Lower quiescent current for improved power efficiency in low-power applications.
These alternative models provide options for different requirements and can be considered based on specific application needs.
Word count: 400 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de BD95513MUV-E2 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of BD95513MUV-E2 in technical solutions:
Q: What is BD95513MUV-E2? A: BD95513MUV-E2 is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.
Q: What are the key features of BD95513MUV-E2? A: Some key features of BD95513MUV-E2 include high efficiency, low power consumption, wide input voltage range, and built-in protection functions.
Q: What is the typical application of BD95513MUV-E2? A: BD95513MUV-E2 is commonly used in applications such as power management for industrial equipment, consumer electronics, and automotive systems.
Q: What is the input voltage range supported by BD95513MUV-E2? A: BD95513MUV-E2 supports an input voltage range of typically 4.5V to 18V.
Q: What is the output voltage range of BD95513MUV-E2? A: The output voltage range of BD95513MUV-E2 can be adjusted from 0.8V to 5.5V.
Q: Does BD95513MUV-E2 have any built-in protection functions? A: Yes, BD95513MUV-E2 includes built-in protection functions such as overcurrent protection, thermal shutdown, and undervoltage lockout.
Q: Can BD95513MUV-E2 operate in a wide temperature range? A: Yes, BD95513MUV-E2 is designed to operate in a wide temperature range, typically from -40°C to +105°C.
Q: What is the efficiency of BD95513MUV-E2? A: BD95513MUV-E2 offers high efficiency, typically up to 95%, which helps in reducing power consumption.
Q: Is BD95513MUV-E2 suitable for automotive applications? A: Yes, BD95513MUV-E2 is suitable for automotive applications as it meets the required automotive standards and has built-in protection functions.
Q: Can BD95513MUV-E2 be used in battery-powered devices? A: Yes, BD95513MUV-E2 can be used in battery-powered devices as it supports a wide input voltage range and has low power consumption.
Please note that these answers are general and may vary depending on the specific application and requirements.