EFM32TG110F4-QFN24T

Product Overview

Category

The EFM32TG110F4-QFN24T belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

• Low power consumption
• High performance
• Small form factor
• Integrated peripherals
• Rich set of features

Package

The EFM32TG110F4-QFN24T comes in a QFN24 package, which stands for Quad Flat No-Lead with 24 pins.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The EFM32TG110F4-QFN24T is typically sold in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

• Microcontroller core: ARM Cortex-M3
• Clock frequency: Up to 32 MHz
• Flash memory: 128 KB
• RAM: 16 KB
• Operating voltage: 1.8V - 3.6V
• Digital I/O pins: 18
• Analog input channels: 12
• Communication interfaces: UART, SPI, I2C
• Timers: 4
• ADC resolution: 12-bit
• Temperature range: -40°C to +85°C

Detailed Pin Configuration

The EFM32TG110F4-QFN24T has a total of 24 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. PA0 - General-purpose I/O pin
3. PA1 - General-purpose I/O pin
4. PA2 - General-purpose I/O pin
5. PA3 - General-purpose I/O pin
6. PA4 - General-purpose I/O pin
7. PA5 - General-purpose I/O pin
8. PA6 - General-purpose I/O pin
9. PA7 - General-purpose I/O pin
10. GND - Ground
11. PB0 - General-purpose I/O pin
12. PB1 - General-purpose I/O pin
13. PB2 - General-purpose I/O pin
14. PB3 - General-purpose I/O pin
15. PB4 - General-purpose I/O pin
16. PB5 - General-purpose I/O pin
17. PB6 - General-purpose I/O pin
18. PB7 - General-purpose I/O pin
19. RESET - Reset pin
20. VDD - Power supply voltage
21. PC0 - General-purpose I/O pin
22. PC1 - General-purpose I/O pin
23. PC2 - General-purpose I/O pin
24. PC3 - General-purpose I/O pin

Functional Features

The EFM32TG110F4-QFN24T offers the following functional features:

• High-performance ARM Cortex-M3 core for efficient processing
• Low power consumption for extended battery life
• Integrated peripherals such as UART, SPI, and I2C for communication
• Timers for precise timing control
• Analog-to-digital converter (ADC) for accurate analog signal measurement
• Flexible digital I/O pins for versatile connectivity

Advantages and Disadvantages

Advantages

• Compact size allows for integration in space-constrained applications
• Low power consumption extends battery life in portable devices
• High-performance core enables efficient data processing
• Rich set of integrated peripherals simplifies system design
• Versatile digital I/O pins offer flexibility in connectivity

Disadvantages

• Limited flash memory and RAM capacity may restrict complex applications
• Availability of alternative models with higher specifications may limit scalability

Working Principles

The EFM32TG110F4-QFN24T operates based on the principles of a microcontroller. It executes instructions stored in its flash memory to control and process data. The ARM Cortex-M3 core provides the computational power, while the integrated peripherals enable communication and interaction with external devices. The low power consumption is achieved through efficient power management techniques.

Detailed Application Field Plans

The EFM32TG110F4-QFN24T finds applications in various fields, including:

1. Internet of Things (IoT) devices
2. Home automation systems
3. Wearable devices
4. Industrial control systems
5. Consumer electronics
6. Medical devices

Detailed and Complete Alternative Models

• EFM32TG210F8-QFN32T: Similar microcontroller with higher flash memory and RAM capacity.
• EFM32TG230F16-QFN48T: Another alternative with increased I/O pins and additional features.
• EFM32TG840F32-QFN64T: Higher-end model with enhanced performance and extended connectivity options.

These alternative models provide more