STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
L6716TR
Ver Detalle Hojas de datos

L6716TR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency
    • Low power consumption
    • Compact size
  • Package: TSSOP-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 1.2V to 35V
  • Output Current: Up to 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The L6716TR IC has a total of 16 pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the regulator on/off
  6. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  7. VCC: Supply voltage pin for internal circuitry
  8. PGND: Power ground pin
  9. BOOT: Bootstrap pin for high-side MOSFET driver
  10. LX: Switching node pin
  11. PG: Power good indicator pin
  12. VSENSE: Current sense pin
  13. AGND: Analog ground pin
  14. CS: Current sense resistor connection pin
  15. SS: Soft-start capacitor connection pin
  16. VREF: Reference voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency conversion for reduced power loss
  • Integrated protection features such as overcurrent and thermal shutdown
  • Adjustable output voltage for flexibility in different scenarios
  • Soft-start and tracking capability for controlled startup behavior

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Compact size enables space-saving designs - Wide input voltage range allows for compatibility with various power sources - Integrated protection features enhance system reliability

Disadvantages: - Limited output current may not be suitable for high-power applications - Higher cost compared to non-integrated voltage regulators

Working Principles

The L6716TR is a voltage regulator IC that utilizes a switching converter topology. It operates by rapidly switching an internal MOSFET on and off to regulate the output voltage. This switching action allows for efficient power conversion while maintaining a stable output voltage. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle of the switching signal to maintain the desired voltage level.

Detailed Application Field Plans

The L6716TR is commonly used in various applications, including:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. Telecommunications systems
  4. Consumer electronics
  5. LED lighting

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Adjustable Step-Down Switching Regulator
  2. LT1084CP-12: 5A Low Dropout Positive Fixed Regulator
  3. TPS5430DDAR: 3A Step-Down Converter with Eco-mode
  4. MAX5033DASA+: 76V, 500mA Step-Down DC-DC Converter
  5. LM317T: Adjustable Voltage Regulator

These alternative models offer similar functionality and can be considered as substitutes for the L6716TR in different applications.

Word count: 346 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de L6716TR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of L6716TR in technical solutions:

  1. Q: What is L6716TR? A: L6716TR is a specific model of voltage regulator IC (integrated circuit) commonly used in technical solutions.

  2. Q: What is the purpose of L6716TR? A: The purpose of L6716TR is to regulate and stabilize voltage levels in electronic circuits, ensuring consistent power supply.

  3. Q: What are the key features of L6716TR? A: Some key features of L6716TR include high efficiency, low dropout voltage, adjustable output voltage, and overcurrent protection.

  4. Q: How does L6716TR achieve high efficiency? A: L6716TR achieves high efficiency through its advanced switching technology, which minimizes power losses during voltage regulation.

  5. Q: Can L6716TR handle different input voltages? A: Yes, L6716TR can handle a wide range of input voltages, typically from 2.5V to 18V, making it versatile for various applications.

  6. Q: Is L6716TR suitable for battery-powered devices? A: Yes, L6716TR is suitable for battery-powered devices as it has a low dropout voltage, allowing efficient use of battery power.

  7. Q: Does L6716TR provide overcurrent protection? A: Yes, L6716TR incorporates overcurrent protection, which safeguards the circuit by limiting the current flow when it exceeds a certain threshold.

  8. Q: Can I adjust the output voltage of L6716TR? A: Yes, L6716TR allows you to adjust the output voltage within a specified range using external resistors or other components.

  9. Q: What are some typical applications of L6716TR? A: L6716TR is commonly used in various technical solutions, including power management systems, industrial automation, and consumer electronics.

  10. Q: Where can I find more information about L6716TR? A: You can refer to the datasheet or technical documentation provided by the manufacturer for detailed information on L6716TR's specifications and application guidelines.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases.