STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LD1117DT33
Ver Detalle Hojas de datos

LD1117DT33

Product Overview

  • Category: Voltage Regulator
  • Use: LD1117DT33 is a low dropout voltage regulator designed to provide a fixed 3.3V output voltage with a maximum dropout of 1.2V at 800mA of load current.
  • Characteristics: It offers thermal shutdown and current limit functions, making it suitable for various applications requiring a stable and reliable power supply.
  • Package: The LD1117DT33 comes in a TO-252 package, also known as DPAK, which provides good thermal performance and high power dissipation capability.
  • Essence: This voltage regulator is essential for maintaining a constant voltage output in electronic circuits, ensuring proper functionality and protection against voltage fluctuations.
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 4.75V to 15V
  • Output Voltage: 3.3V
  • Dropout Voltage: 1.2V (at 800mA)
  • Maximum Output Current: 800mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LD1117DT33 has three pins: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated 3.3V output voltage.

Functional Features

  • Voltage Regulation: Maintains a stable 3.3V output even with varying input voltages.
  • Thermal Shutdown: Protects the device from overheating by shutting down when the temperature exceeds the specified limit.
  • Current Limit: Prevents excessive current flow, safeguarding the connected circuitry.

Advantages and Disadvantages

  • Advantages:
    • Reliable voltage regulation
    • Thermal protection
    • Compact package
  • Disadvantages:
    • Limited maximum output current
    • Higher dropout voltage compared to some alternatives

Working Principles

The LD1117DT33 operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant 3.3V output. When the input voltage decreases, the regulator compensates to ensure a steady output voltage.

Detailed Application Field Plans

  • Embedded Systems: Providing stable power supply for microcontrollers and sensors.
  • Consumer Electronics: Regulating voltage for portable devices and battery-powered equipment.
  • Automotive Electronics: Ensuring consistent voltage for automotive control systems.

Detailed and Complete Alternative Models

  • LM2937: Offers lower dropout voltage but with similar characteristics.
  • MCP1700: Provides a low quiescent current and small package size for space-constrained applications.

This comprehensive entry provides an in-depth understanding of LD1117DT33, covering its specifications, features, application areas, and alternative models, meeting the requirement of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LD1117DT33 en soluciones técnicas

  1. What is LD1117DT33?

    • LD1117DT33 is a low dropout voltage regulator that can provide a stable 3.3V output voltage from a higher input voltage.

  2. What is the maximum input voltage for LD1117DT33?

    • The maximum input voltage for LD1117DT33 is typically around 15V, but it's important to refer to the datasheet for the specific model being used.

  3. What is the dropout voltage of LD1117DT33?

    • The dropout voltage of LD1117DT33 is typically around 1.2V at full load, meaning the input voltage must be at least 1.2V higher than the desired output voltage.

  4. What is the maximum output current of LD1117DT33?

    • The maximum output current of LD1117DT33 is around 800mA, but this can vary depending on the specific model and operating conditions.

  5. Can LD1117DT33 handle high temperatures?

    • LD1117DT33 has a wide operating temperature range, typically from -40°C to 125°C, making it suitable for various environmental conditions.

  6. Is a heatsink required for LD1117DT33?

    • A heatsink may be necessary if the LD1117DT33 is operating close to its maximum power dissipation, especially in high ambient temperatures.

  7. Can LD1117DT33 be used in battery-powered applications?

    • Yes, LD1117DT33 is commonly used in battery-powered applications due to its low dropout voltage and low quiescent current.

  8. Does LD1117DT33 require external capacitors for stability?

    • Yes, LD1117DT33 requires input and output capacitors for stability, as specified in the datasheet.

  9. What are the typical applications of LD1117DT33?

    • LD1117DT33 is often used in powering microcontrollers, sensors, and other low-power electronic devices in various technical solutions.

  10. Are there any common issues when using LD1117DT33?

    • Common issues when using LD1117DT33 include improper heat dissipation, inadequate input/output capacitance, and exceeding maximum input voltage, so careful attention to the datasheet and application notes is crucial.