STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LD2982BM18R
Ver Detalle Hojas de datos

LD2982BM18R

Product Overview

Category

The LD2982BM18R belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High output voltage accuracy
  • Thermal shutdown protection
  • Short-circuit current limit

Package

The LD2982BM18R comes in a small outline package (SOT-23) which is suitable for surface mount applications.

Essence

The essence of LD2982BM18R lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

The LD2982BM18R is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 1.8V
  • Dropout Voltage: 300mV at 100mA
  • Quiescent Current: 50µA
  • Output Current: Up to 100mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LD2982BM18R has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Regulated output voltage pin.

Functional Features

  • Low Dropout Voltage: The LD2982BM18R exhibits low dropout voltage, enabling it to regulate voltage even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: It consumes minimal current when in standby mode, reducing power consumption.
  • High Output Voltage Accuracy: The LD2982BM18R provides precise and accurate output voltage, ensuring stable operation of connected devices.
  • Thermal Shutdown Protection: It incorporates a thermal shutdown mechanism that protects the regulator from overheating, preventing damage to the device.
  • Short-Circuit Current Limit: The LD2982BM18R has built-in protection against excessive current flow in case of a short circuit, safeguarding the connected circuitry.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low power consumption
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited output current capacity (up to 100mA)
  • Requires external components for stability

Working Principles

The LD2982BM18R is a linear voltage regulator that operates by maintaining a constant voltage difference between its input and output pins. It utilizes a pass transistor to regulate the output voltage based on the feedback received from a voltage reference circuit. By adjusting the resistance within the regulator, it compensates for any variations in the input voltage, ensuring a stable output voltage.

Detailed Application Field Plans

The LD2982BM18R finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Automotive electronics - Industrial control systems - Medical equipment

Detailed and Complete Alternative Models

  1. LM1117-1.8: A popular alternative with similar specifications and pin configuration.
  2. LP2985-1.8: Another alternative offering low dropout voltage and high output voltage accuracy.
  3. MCP1701-1802E/TO: An alternative with a wide input voltage range and low quiescent current.

These alternative models provide comparable performance and can be used as substitutes for LD2982BM18R in various applications.

Word count: 446 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LD2982BM18R en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LD2982BM18R in technical solutions:

  1. Q: What is LD2982BM18R? A: LD2982BM18R is a low dropout voltage regulator IC that provides a fixed output voltage of 1.8V.

  2. Q: What is the maximum input voltage for LD2982BM18R? A: The maximum input voltage for LD2982BM18R is typically 16V.

  3. Q: What is the dropout voltage of LD2982BM18R? A: The dropout voltage of LD2982BM18R is typically around 300mV at a load current of 100mA.

  4. Q: Can LD2982BM18R handle high currents? A: No, LD2982BM18R is designed for low current applications. It can typically handle a maximum load current of 50mA.

  5. Q: Is LD2982BM18R suitable for battery-powered applications? A: Yes, LD2982BM18R is suitable for battery-powered applications as it has a low quiescent current and low dropout voltage.

  6. Q: Does LD2982BM18R have built-in thermal protection? A: Yes, LD2982BM18R has built-in thermal shutdown protection to prevent overheating.

  7. Q: Can LD2982BM18R be used in automotive applications? A: Yes, LD2982BM18R is automotive-grade and can be used in automotive applications within its specified operating conditions.

  8. Q: What is the package type of LD2982BM18R? A: LD2982BM18R is available in a small SOT-23 package.

  9. Q: Does LD2982BM18R require external capacitors for stability? A: Yes, LD2982BM18R requires an input and output capacitor for stability. The datasheet provides recommended values.

  10. Q: Can LD2982BM18R be used in adjustable voltage applications? A: No, LD2982BM18R provides a fixed output voltage of 1.8V and cannot be adjusted.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.