Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LMC6464AIM
Ver Detalle Hojas de datos

LMC6464AIM

Product Overview

Category

LMC6464AIM belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal processing and amplification.

Characteristics

  • LMC6464AIM is a quad operational amplifier.
  • It operates on a single power supply voltage.
  • The device has low input offset voltage and low input bias current.
  • It offers high gain bandwidth and fast slew rate.
  • LMC6464AIM is designed for general-purpose applications.

Package

The LMC6464AIM is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of LMC6464AIM lies in its ability to provide accurate and reliable signal amplification in various electronic circuits.

Packaging/Quantity

The LMC6464AIM is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 12V
  • Input Offset Voltage: ±1mV
  • Input Bias Current: ±10nA
  • Gain Bandwidth Product: 1MHz
  • Slew Rate: 0.5V/µs
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LMC6464AIM has a total of 14 pins, which are assigned as follows:

  1. OUT1: Output pin for amplifier 1
  2. IN-1: Inverting input pin for amplifier 1
  3. IN+1: Non-inverting input pin for amplifier 1
  4. V-: Negative power supply pin
  5. V+: Positive power supply pin
  6. IN+2: Non-inverting input pin for amplifier 2
  7. IN-2: Inverting input pin for amplifier 2
  8. OUT2: Output pin for amplifier 2
  9. IN-3: Inverting input pin for amplifier 3
  10. IN+3: Non-inverting input pin for amplifier 3
  11. OUT3: Output pin for amplifier 3
  12. IN+4: Non-inverting input pin for amplifier 4
  13. IN-4: Inverting input pin for amplifier 4
  14. OUT4: Output pin for amplifier 4

Functional Features

  • Low input offset voltage and bias current ensure accurate signal amplification.
  • High gain bandwidth product allows for amplification of high-frequency signals.
  • Single power supply operation simplifies circuit design.
  • Fast slew rate enables the amplification of rapidly changing signals.

Advantages and Disadvantages

Advantages

  • Accurate and reliable signal amplification.
  • Suitable for general-purpose applications.
  • Compact SOIC package for space-constrained designs.
  • Wide operating temperature range.

Disadvantages

  • Limited gain bandwidth compared to specialized amplifiers.
  • Not suitable for high-power applications.

Working Principles

The LMC6464AIM operates as a quad operational amplifier, where each amplifier can independently amplify an input signal. The amplification is achieved through the use of internal transistors and feedback networks. The device operates on a single power supply voltage, which simplifies the circuit design.

Detailed Application Field Plans

The LMC6464AIM finds applications in various electronic systems, including but not limited to: - Audio amplifiers - Sensor signal conditioning circuits - Active filters - Instrumentation amplifiers - Voltage-controlled oscillators

Detailed and Complete Alternative Models

  1. LM324: Quad operational amplifier with similar characteristics and pin configuration.
  2. TL074: Low-noise JFET-input quad operational amplifier.
  3. AD8674: Precision quad operational amplifier with low input offset voltage.

These alternative models offer similar functionality and can be used as substitutes for the LMC6464AIM in various applications.

Word count: 511 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LMC6464AIM en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LMC6464AIM in technical solutions:

  1. Q: What is LMC6464AIM? A: LMC6464AIM is a low-power quad operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What are the key features of LMC6464AIM? A: Some key features of LMC6464AIM include low power consumption, rail-to-rail input/output operation, wide supply voltage range, and high precision.

  3. Q: In what applications can LMC6464AIM be used? A: LMC6464AIM can be used in a wide range of applications such as signal conditioning, amplification, filtering, sensor interfaces, and audio processing.

  4. Q: What is the supply voltage range for LMC6464AIM? A: The supply voltage range for LMC6464AIM typically ranges from 2.7V to 12V, making it suitable for both low and high voltage applications.

  5. Q: Can LMC6464AIM operate with a single power supply? A: Yes, LMC6464AIM can operate with a single power supply, making it convenient for battery-powered or portable devices.

  6. Q: What is the typical input offset voltage of LMC6464AIM? A: The typical input offset voltage of LMC6464AIM is very low, usually in the microvolt range, ensuring accurate signal amplification and processing.

  7. Q: Does LMC6464AIM support rail-to-rail input and output operation? A: Yes, LMC6464AIM supports rail-to-rail input and output operation, allowing it to handle signals close to the supply voltage rails without distortion.

  8. Q: Can LMC6464AIM drive capacitive loads? A: Yes, LMC6464AIM has a high output current capability, enabling it to drive capacitive loads without significant degradation in performance.

  9. Q: Is LMC6464AIM suitable for precision applications? A: Yes, LMC6464AIM is suitable for precision applications due to its low input offset voltage, low input bias current, and high open-loop gain.

  10. Q: What package options are available for LMC6464AIM? A: LMC6464AIM is available in various package options such as SOIC (Small Outline Integrated Circuit) and PDIP (Plastic Dual In-line Package), providing flexibility for different PCB designs and assembly processes.

Please note that the specific details may vary depending on the manufacturer's datasheet and specifications.