Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
OPA2810IDGKR
Ver Detalle Hojas de datos

OPA2810IDGKR

Product Overview

Category

OPA2810IDGKR belongs to the category of operational amplifiers (op-amps).

Use

The OPA2810IDGKR op-amp is commonly used in various electronic circuits for amplification and signal conditioning purposes.

Characteristics

  • High gain: The OPA2810IDGKR offers a high open-loop voltage gain, making it suitable for applications requiring precise amplification.
  • Low noise: This op-amp has low input noise, ensuring accurate signal processing even in low-level applications.
  • Wide bandwidth: With a wide frequency response range, the OPA2810IDGKR can handle signals across a broad spectrum.
  • Low power consumption: It operates on low power supply voltages, making it energy-efficient.
  • Rail-to-rail output swing: The op-amp provides an output voltage that can reach close to the power supply rails.

Package

The OPA2810IDGKR comes in a small form factor package known as VSSOP-8 (Very Small Outline Package). This package allows for easy integration into compact circuit designs.

Essence

The essence of the OPA2810IDGKR lies in its ability to amplify and condition electrical signals accurately and efficiently.

Packaging/Quantity

The OPA2810IDGKR is typically available in reels or tubes, with each reel containing 2500 units or each tube containing 98 units.

Specifications

  • Supply voltage: ±2.5V to ±18V
  • Input offset voltage: 1mV (maximum)
  • Input bias current: 1nA (maximum)
  • Gain bandwidth product: 10MHz
  • Slew rate: 7V/µs
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

The OPA2810IDGKR op-amp has the following pin configuration:

  1. OUT: Output pin
  2. V+: Positive power supply pin
  3. V-: Negative power supply pin
  4. IN+: Non-inverting input pin
  5. IN-: Inverting input pin
  6. NC: No connection (unused pin)
  7. NC: No connection (unused pin)
  8. GND: Ground pin

Functional Features

  • High precision amplification: The OPA2810IDGKR provides accurate amplification of input signals, ensuring minimal distortion.
  • Low input bias current: It exhibits low input bias current, reducing the impact on sensitive circuits and maintaining signal integrity.
  • Rail-to-rail output swing: The op-amp can drive signals close to both the positive and negative power supply rails, maximizing dynamic range.
  • Stable operation: It offers excellent stability and is immune to oscillations, ensuring reliable performance in various applications.

Advantages and Disadvantages

Advantages

  • High gain and wide bandwidth enable precise signal amplification across a broad frequency range.
  • Low noise characteristics ensure accurate processing of low-level signals.
  • Small form factor package allows for easy integration into space-constrained designs.
  • Low power consumption makes it suitable for battery-powered applications.

Disadvantages

  • Limited supply voltage range compared to some other op-amps.
  • Not suitable for high-power applications due to its small package size.

Working Principles

The OPA2810IDGKR operates based on the principles of differential amplification. It amplifies the voltage difference between its non-inverting and inverting inputs, producing an amplified output signal. The op-amp's internal circuitry ensures high gain, low noise, and stable operation.

Detailed Application Field Plans

The OPA2810IDGKR finds applications in various fields, including but not limited to: - Audio amplification and processing - Sensor signal conditioning - Medical instrumentation - Industrial control systems - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the OPA2810IDGKR include: - OPA2180IDGKR - OPA380AIDBVR - OPA1612AIDR

These alternatives offer similar functionality and characteristics, providing flexibility in choosing the most suitable op-amp for specific applications.

Word count: 550 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de OPA2810IDGKR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of OPA2810IDGKR in technical solutions:

  1. Q: What is the OPA2810IDGKR? A: The OPA2810IDGKR is a high-speed, low-power operational amplifier (op-amp) designed for various applications in electronics.

  2. Q: What is the supply voltage range for OPA2810IDGKR? A: The supply voltage range for OPA2810IDGKR is typically between 2.7V and 5.5V.

  3. Q: What is the bandwidth of OPA2810IDGKR? A: The bandwidth of OPA2810IDGKR is typically around 100 MHz.

  4. Q: What is the input offset voltage of OPA2810IDGKR? A: The input offset voltage of OPA2810IDGKR is typically around 1 mV.

  5. Q: Can OPA2810IDGKR operate in single-supply mode? A: Yes, OPA2810IDGKR can operate in both single-supply and dual-supply modes.

  6. Q: What is the quiescent current consumption of OPA2810IDGKR? A: The quiescent current consumption of OPA2810IDGKR is typically around 2.5 mA.

  7. Q: Is OPA2810IDGKR suitable for low-power applications? A: Yes, OPA2810IDGKR is designed to be low-power, making it suitable for low-power applications.

  8. Q: What is the input voltage range of OPA2810IDGKR? A: The input voltage range of OPA2810IDGKR typically extends from the negative supply voltage to the positive supply voltage.

  9. Q: Can OPA2810IDGKR drive capacitive loads? A: Yes, OPA2810IDGKR is capable of driving capacitive loads up to a certain limit specified in the datasheet.

  10. Q: What are some typical applications for OPA2810IDGKR? A: Some typical applications for OPA2810IDGKR include audio amplification, signal conditioning, data acquisition systems, and sensor interfaces.

Please note that the answers provided here are general and may vary depending on specific operating conditions and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.