Category: Integrated Circuit (IC)
Use: Voltage Supervisor
Characteristics: - Monitors the power supply voltage of a system - Generates a reset signal when the voltage falls below a specified threshold - Ensures proper operation and prevents data corruption in electronic systems
Package: DFN (Dual Flat No-Lead)
Essence: The TL7712ACDE4 is a voltage supervisor IC designed to monitor the power supply voltage and provide a reset signal to the system when the voltage drops below a predetermined level.
Packaging/Quantity: The TL7712ACDE4 is available in a DFN package. It is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.
The TL7712ACDE4 has the following pin configuration:
Advantages: - Provides reliable voltage monitoring and reset functionality. - Adjustable threshold voltage and timeout period offer flexibility in system design. - Low power consumption. - Small form factor package saves board space.
Disadvantages: - Limited number of threshold voltage options. - Lack of built-in hysteresis may result in potential oscillations near the threshold voltage.
The TL7712ACDE4 operates by comparing the input voltage (VIT) with the preset threshold voltage. When VIT falls below the threshold, the internal circuitry triggers the RESET output, generating a reset signal. The reset signal remains active until the voltage rises above the threshold or the timeout period elapses.
The TL7712ACDE4 is widely used in various electronic systems where reliable voltage monitoring and reset functionality are crucial. Some common application fields include:
These alternative models offer similar features and can be considered as substitutes for the TL7712ACDE4 in different applications.
Word count: 524 words
Sure! Here are 10 common questions and answers related to the application of TL7712ACDE4 in technical solutions:
Q: What is TL7712ACDE4? A: TL7712ACDE4 is a voltage supervisor and reset IC that monitors the power supply voltage and generates a reset signal when the voltage falls below a specified threshold.
Q: What are the typical applications of TL7712ACDE4? A: TL7712ACDE4 is commonly used in microcontroller-based systems, digital circuits, and other applications where a reliable reset signal is required.
Q: How does TL7712ACDE4 work? A: TL7712ACDE4 compares the monitored voltage with a reference voltage and generates a reset signal when the monitored voltage falls below the reference voltage.
Q: What is the operating voltage range of TL7712ACDE4? A: TL7712ACDE4 operates within a voltage range of 2.7V to 18V.
Q: Can TL7712ACDE4 be used with both positive and negative supply voltages? A: No, TL7712ACDE4 is designed for use with positive supply voltages only.
Q: What is the typical reset voltage threshold of TL7712ACDE4? A: The reset voltage threshold of TL7712ACDE4 is typically set at 4.65V.
Q: Does TL7712ACDE4 have any built-in delay for generating the reset signal? A: Yes, TL7712ACDE4 has an adjustable delay feature that allows users to set the delay time according to their requirements.
Q: Can TL7712ACDE4 tolerate voltage spikes or transients? A: Yes, TL7712ACDE4 has built-in protection features to withstand voltage spikes and transients.
Q: What is the output type of TL7712ACDE4? A: TL7712ACDE4 provides an active-low reset signal as its output.
Q: Is TL7712ACDE4 available in different package options? A: Yes, TL7712ACDE4 is available in various package options, such as SOIC-8 and PDIP-8, to suit different application requirements.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for TL7712ACDE4.