Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TLV2375IPWRG4
Ver Detalle Hojas de datos

TLV2375IPWRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-voltage, Rail-to-Rail Input/Output, Single Supply, General Purpose
  • Package: TSSOP-14
  • Essence: The TLV2375IPWRG4 is a low-voltage operational amplifier designed for general-purpose applications. It offers rail-to-rail input and output capabilities, making it suitable for single-supply systems.
  • Packaging/Quantity: The TLV2375IPWRG4 is available in a TSSOP-14 package and is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage Range: 2.7V to 6V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Quiescent Current: 900µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2375IPWRG4 has a total of 14 pins arranged as follows:

___________ | | 1 | OUT | 14 2 | VCC+ | 13 3 | IN(-) | 12 4 | IN(+) | 11 5 | GND | 10 6 | NC | 9 7 | NC | 8 |___________|

Functional Features

  • Low-voltage operation: The TLV2375IPWRG4 operates from a supply voltage as low as 2.7V, making it suitable for battery-powered applications.
  • Rail-to-rail input/output: It can accept and provide signals that are close to the supply rails, maximizing the dynamic range in single-supply systems.
  • General-purpose design: The TLV2375IPWRG4 is versatile and can be used in various applications such as audio amplification, sensor signal conditioning, and active filters.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with different power sources. - Rail-to-rail input/output enables maximum signal swing in single-supply systems. - Low quiescent current minimizes power consumption. - Small package size (TSSOP-14) offers space-saving benefits.

Disadvantages: - Limited gain bandwidth product compared to specialized operational amplifiers. - Higher input offset voltage compared to precision amplifiers.

Working Principles

The TLV2375IPWRG4 is based on a differential amplifier configuration using complementary metal-oxide-semiconductor (CMOS) technology. It utilizes a combination of transistors and resistors to amplify and process input signals. The rail-to-rail input/output capability is achieved through careful biasing and circuit design techniques.

Detailed Application Field Plans

The TLV2375IPWRG4 can be applied in various fields, including but not limited to:

  1. Audio Amplification: The low-voltage operation and rail-to-rail capabilities make it suitable for audio signal amplification in portable devices.
  2. Sensor Signal Conditioning: The TLV2375IPWRG4 can be used to condition and amplify signals from sensors such as temperature, pressure, or light sensors.
  3. Active Filters: It can be employed in active filter circuits to process and shape signals in communication systems or audio applications.

Detailed and Complete Alternative Models

  1. TLV2374IPWRG4: Similar to TLV2375IPWRG4 but with four amplifiers in a single package.
  2. TLV2372IPWRG4: Dual operational amplifier with similar characteristics as TLV2375IPWRG4.
  3. TLV2371IPWRG4: Single operational amplifier with similar characteristics as TLV2375IPWRG4.

These alternative models provide flexibility in choosing the right number of amplifiers for specific applications while maintaining similar performance characteristics.

Word count: 487 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2375IPWRG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TLV2375IPWRG4:

  1. Q: What is TLV2375IPWRG4? A: TLV2375IPWRG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for general-purpose applications.

  2. Q: What is the supply voltage range for TLV2375IPWRG4? A: The supply voltage range for TLV2375IPWRG4 is typically between 2.7V and 5.5V.

  3. Q: What is the input voltage range of TLV2375IPWRG4? A: The input voltage range of TLV2375IPWRG4 extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Q: What is the typical gain bandwidth product (GBW) of TLV2375IPWRG4? A: The typical GBW of TLV2375IPWRG4 is 1 MHz.

  5. Q: Can TLV2375IPWRG4 operate with a single supply voltage? A: Yes, TLV2375IPWRG4 can operate with a single supply voltage as long as it is within the specified range.

  6. Q: What is the input bias current of TLV2375IPWRG4? A: The input bias current of TLV2375IPWRG4 is typically 1 pA.

  7. Q: Is TLV2375IPWRG4 suitable for precision applications? A: Yes, TLV2375IPWRG4 is suitable for precision applications due to its low offset voltage and low input bias current.

  8. Q: Can TLV2375IPWRG4 drive capacitive loads? A: Yes, TLV2375IPWRG4 can drive capacitive loads up to 100 pF without any external compensation.

  9. Q: What is the typical quiescent current of TLV2375IPWRG4? A: The typical quiescent current of TLV2375IPWRG4 is 500 µA.

  10. Q: Is TLV2375IPWRG4 available in a surface-mount package? A: Yes, TLV2375IPWRG4 is available in a surface-mount package with the part number IPW.