Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TLV2465CD
Ver Detalle Hojas de datos

TLV2465CD

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Precision Amplification
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: High-performance operational amplifier for various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: ±1.35 V to ±8 V
  • Input Offset Voltage: 500 µV (maximum)
  • Input Bias Current: 1 pA (typical)
  • Gain Bandwidth Product: 10 MHz (typical)
  • Slew Rate: 6 V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2465CD has a standard pin configuration with eight pins:

  1. Non-Inverting Input (+)
  2. Inverting Input (-)
  3. Output
  4. Negative Power Supply (-Vcc)
  5. Positive Power Supply (+Vcc)
  6. Null (used for offset nulling)
  7. Not Connected (NC)
  8. Ground (GND)

Functional Features

  • Low input offset voltage and bias current for accurate amplification
  • Rail-to-rail input and output capability for maximum dynamic range
  • Low power consumption for energy efficiency
  • Wide operating temperature range for versatile applications
  • High gain bandwidth product and slew rate for fast signal processing

Advantages and Disadvantages

Advantages: - Accurate amplification with low input offset voltage and bias current - Wide dynamic range due to rail-to-rail input/output capability - Energy-efficient operation with low power consumption - Versatile usage in various applications due to wide operating temperature range - Fast signal processing with high gain bandwidth product and slew rate

Disadvantages: - Limited availability in reel packaging only - May require additional components for specific applications

Working Principles

The TLV2465CD is an operational amplifier that amplifies the difference between its two input terminals. It operates on a dual power supply, allowing it to handle both positive and negative voltage signals. The amplifier's internal circuitry ensures accurate amplification by minimizing input offset voltage and bias current.

Detailed Application Field Plans

The TLV2465CD can be used in various applications, including but not limited to: 1. Audio Amplification: Provides precise amplification for audio signals in audio equipment. 2. Sensor Signal Conditioning: Amplifies weak sensor signals for further processing in measurement systems. 3. Active Filters: Enables the design of active filters for frequency response shaping in communication systems. 4. Data Acquisition Systems: Amplifies analog signals from sensors before digitization in data acquisition systems. 5. Industrial Control Systems: Facilitates accurate signal conditioning and control in industrial automation.

Detailed and Complete Alternative Models

  1. TLV2462CD: Dual operational amplifier with similar specifications and pin configuration.
  2. TLV2461CD: Single operational amplifier with similar specifications and pin configuration.
  3. TLV2464CD: Quad operational amplifier with similar specifications and pin configuration.

These alternative models provide options based on the required number of amplifiers and specific application needs.

Word count: 410 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2465CD en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TLV2465CD in technical solutions:

  1. Q: What is TLV2465CD? A: TLV2465CD is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.

  2. Q: What is the supply voltage range for TLV2465CD? A: The supply voltage range for TLV2465CD is typically between 2.7V and 6V.

  3. Q: What is the input voltage range of TLV2465CD? A: The input voltage range of TLV2465CD extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Q: Can TLV2465CD operate with a single power supply? A: Yes, TLV2465CD can operate with a single power supply as long as it is within the specified supply voltage range.

  5. Q: What is the typical gain bandwidth product of TLV2465CD? A: The typical gain bandwidth product of TLV2465CD is around 3 MHz.

  6. Q: Is TLV2465CD suitable for low-power applications? A: Yes, TLV2465CD is designed to be low-power, making it suitable for battery-powered or energy-efficient applications.

  7. Q: Can TLV2465CD drive capacitive loads? A: Yes, TLV2465CD has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.

  8. Q: Does TLV2465CD have built-in protection features? A: Yes, TLV2465CD includes built-in features such as short-circuit protection and thermal shutdown to ensure safe operation.

  9. Q: What is the input offset voltage of TLV2465CD? A: The input offset voltage of TLV2465CD is typically very low, which helps minimize errors in precision applications.

  10. Q: Can TLV2465CD be used in audio applications? A: Yes, TLV2465CD can be used in audio applications such as audio amplifiers or headphone amplifiers due to its low distortion and wide bandwidth.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.