The TPS3619-33DGKRG4 belongs to the category of voltage supervisors.
It is primarily used for monitoring and controlling the voltage levels in electronic circuits.
The TPS3619-33DGKRG4 is available in an MSOP-8 package.
The essence of the TPS3619-33DGKRG4 is its ability to provide accurate voltage monitoring and control, ensuring the proper functioning of electronic circuits.
The TPS3619-33DGKRG4 is typically packaged in reels containing 2500 units.
The TPS3619-33DGKRG4 has the following pin configuration:
```
| | --| VDD | --| GND | --| MR | --| RESET | --| GND | --| GND | --| RESET_OUT | |___________| ```
The TPS3619-33DGKRG4 operates by continuously monitoring the input voltage. When the voltage drops below the preset threshold (3.3V), the device generates a reset signal. The reset signal remains active until the voltage rises above the threshold and the adjustable timeout period elapses.
The TPS3619-33DGKRG4 finds applications in various fields, including: 1. Power management systems 2. Battery-powered devices 3. Microcontrollers and microprocessors 4. Industrial automation 5. Automotive electronics
Some alternative models that offer similar functionality to the TPS3619-33DGKRG4 include: 1. TPS3808G01DBVR 2. MAX809TTRG 3. ADM708ARZ 4. MCP101T-450I/TT
These models can be considered as alternatives based on specific requirements and compatibility with the application.
Word count: 408 words
Sure! Here are 10 common questions and answers related to the application of TPS3619-33DGKRG4 in technical solutions:
Q: What is the TPS3619-33DGKRG4? A: The TPS3619-33DGKRG4 is a low-power, overvoltage protection device designed for use in various technical solutions.
Q: What is the input voltage range of the TPS3619-33DGKRG4? A: The TPS3619-33DGKRG4 has an input voltage range of 2.5V to 6.5V.
Q: What is the output voltage of the TPS3619-33DGKRG4? A: The TPS3619-33DGKRG4 provides a fixed output voltage of 3.3V.
Q: What is the maximum current that the TPS3619-33DGKRG4 can handle? A: The TPS3619-33DGKRG4 can handle a maximum continuous current of 150mA.
Q: How does the TPS3619-33DGKRG4 protect against overvoltage? A: The TPS3619-33DGKRG4 monitors the input voltage and shuts off the output when it exceeds a certain threshold, protecting downstream components.
Q: Can the TPS3619-33DGKRG4 be used in battery-powered applications? A: Yes, the TPS3619-33DGKRG4 is suitable for battery-powered applications due to its low power consumption.
Q: Does the TPS3619-33DGKRG4 have built-in thermal shutdown protection? A: Yes, the TPS3619-33DGKRG4 includes thermal shutdown protection to prevent damage from excessive heat.
Q: Can the TPS3619-33DGKRG4 be used in automotive applications? A: Yes, the TPS3619-33DGKRG4 is qualified for automotive applications and meets the necessary standards.
Q: What package does the TPS3619-33DGKRG4 come in? A: The TPS3619-33DGKRG4 is available in a small 8-pin VSSOP package.
Q: Are there any evaluation boards or reference designs available for the TPS3619-33DGKRG4? A: Yes, Texas Instruments provides evaluation boards and reference designs to help with the implementation of the TPS3619-33DGKRG4 in various applications.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.