Category: Integrated Circuits (ICs)
Use: Voltage Supervisors
Characteristics: - Monitors voltage levels and provides a reset signal when the voltage falls below a specified threshold - Low-power consumption - Wide operating voltage range - Adjustable reset threshold - Programmable delay time - Small package size
Package: SOT-23-6
Essence: The TPS3808G01MDBVTEP is a voltage supervisor IC that ensures proper system operation by monitoring the voltage levels and generating a reset signal when the voltage falls below a specified threshold.
Packaging/Quantity: The TPS3808G01MDBVTEP is available in tape and reel packaging, with 3000 units per reel.
The TPS3808G01MDBVTEP has the following pin configuration:
```
| | --| RESET | --| GND | --| MR | --| VDD | --| VIT | |___________| ```
Advantages: - Accurate voltage monitoring - Adjustable threshold and timeout settings - Low power consumption - Small package size
Disadvantages: - Limited number of available reset threshold options - Manual reset input may require additional external components for implementation
The TPS3808G01MDBVTEP works by comparing the voltage at the VIT pin with the programmed threshold voltage. If the voltage falls below the threshold, the IC generates a reset signal on the RESET pin. The reset signal remains active until the voltage rises above the threshold or a timeout period elapses.
The adjustable threshold and timeout settings allow customization based on specific system requirements. The low quiescent current ensures minimal power consumption, making it suitable for battery-powered applications.
The TPS3808G01MDBVTEP is commonly used in various electronic systems where reliable voltage monitoring and reset generation are critical. Some potential application fields include:
These alternative models offer similar
Sure! Here are 10 common questions and answers related to the application of TPS3808G01MDBVTEP:
Q: What is TPS3808G01MDBVTEP? A: TPS3808G01MDBVTEP is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q: What is the purpose of TPS3808G01MDBVTEP? A: The purpose of TPS3808G01MDBVTEP is to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of TPS3808G01MDBVTEP? A: TPS3808G01MDBVTEP operates within a voltage range of 0.7V to 5.5V.
Q: How does TPS3808G01MDBVTEP detect undervoltage conditions? A: TPS3808G01MDBVTEP uses an internal voltage reference and comparator to detect when the monitored voltage falls below a programmable threshold.
Q: Can TPS3808G01MDBVTEP be used in battery-powered applications? A: Yes, TPS3808G01MDBVTEP can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.6µA.
Q: What is the typical reset time delay of TPS3808G01MDBVTEP? A: The typical reset time delay of TPS3808G01MDBVTEP is 200ms.
Q: Does TPS3808G01MDBVTEP have an open-drain or push-pull output? A: TPS3808G01MDBVTEP has an open-drain output, which allows for flexibility in connecting to different microcontrollers or devices.
Q: Can TPS3808G01MDBVTEP be used in automotive applications? A: Yes, TPS3808G01MDBVTEP is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.
Q: What is the temperature range of TPS3808G01MDBVTEP? A: TPS3808G01MDBVTEP can operate within a temperature range of -40°C to +125°C.
Q: Is TPS3808G01MDBVTEP available in different package options? A: Yes, TPS3808G01MDBVTEP is available in a small SOT-23 package, making it suitable for space-constrained designs.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.