Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TPS610994YFFR
Ver Detalle Hojas de datos

TPS610994YFFR

Product Overview

Category

The TPS610994YFFR belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators - switching regulators classification.

Use

This product is primarily used for boosting or stepping up voltage levels in various electronic devices and applications.

Characteristics

  • High efficiency voltage conversion
  • Wide input voltage range
  • Adjustable output voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

The TPS610994YFFR is available in a small, surface-mount package. It is commonly found in a 10-pin DSBGA (0.8mm x 1.2mm) package.

Essence

The essence of the TPS610994YFFR lies in its ability to efficiently convert input voltages to higher output voltages, making it suitable for battery-powered devices that require higher voltage levels.

Packaging/Quantity

Typically, the TPS610994YFFR is supplied in reels or tape and reel packaging. The quantity per reel can vary depending on the manufacturer, but a common quantity is 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 12V
  • Output Voltage Range: 3.3V to 15V
  • Maximum Output Current: 500mA
  • Switching Frequency: 1.2MHz
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPS610994YFFR has a total of 10 pins. Here is the detailed pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin (active high)
  3. FB: Feedback pin for output voltage regulation
  4. GND: Ground pin
  5. SW: Switching node pin
  6. PGND: Power ground pin
  7. VOUT: Output voltage pin
  8. BST: Boost capacitor connection pin
  9. NC: No connect pin
  10. VIN: Input voltage pin

Functional Features

  • High efficiency voltage conversion: The TPS610994YFFR offers high efficiency in converting input voltages to higher output voltages, minimizing power loss.
  • Adjustable output voltage: The output voltage can be adjusted within the specified range, providing flexibility for different application requirements.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard against excessive current flow, protecting both the device and the connected components.
  • Thermal shutdown protection: In case of excessive temperature rise, the TPS610994YFFR has built-in thermal shutdown protection to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency conversion results in reduced power consumption.
  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable output voltage provides versatility for different applications.
  • Integrated overcurrent and thermal protection enhance reliability and safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Small package size may pose challenges during assembly or soldering processes.

Working Principles

The TPS610994YFFR operates as a boost converter, utilizing a switching regulator topology. It employs an internal power MOSFET switch to control the energy transfer from the input to the output. The switching frequency is set at 1.2MHz, allowing for efficient voltage conversion. The feedback mechanism ensures that the output voltage remains within the desired range by adjusting the duty cycle of the switch.

Detailed Application Field Plans

The TPS610994YFFR finds applications in various fields, including but not limited to: - Portable electronic devices (e.g., smartphones, tablets) - Battery-powered devices (e.g., wearables, IoT devices) - Industrial equipment - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  1. TPS61099YFFR: Similar to the TPS610994YFFR, but with a higher maximum output current of 1A.
  2. TPS61100YFFR: A related model with adjustable output voltage and a higher switching frequency of 2MHz.
  3. TPS61220YFFR: Another alternative with a lower input voltage range and a fixed output voltage.

These alternative models offer different specifications and features, allowing users to choose the most suitable option for their specific application requirements.

Word count: 570 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS610994YFFR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TPS610994YFFR in technical solutions:

  1. Q: What is TPS610994YFFR? A: TPS610994YFFR is a boost converter integrated circuit (IC) designed for applications requiring a regulated output voltage higher than the input voltage.

  2. Q: What is the input voltage range of TPS610994YFFR? A: The input voltage range of TPS610994YFFR is typically between 0.9V and 5.5V.

  3. Q: What is the output voltage range of TPS610994YFFR? A: The output voltage range of TPS610994YFFR can be set from 1.8V to 5.25V using external resistors.

  4. Q: What is the maximum output current of TPS610994YFFR? A: The maximum output current of TPS610994YFFR is typically 1A.

  5. Q: Can TPS610994YFFR operate in low-power mode? A: Yes, TPS610994YFFR has a low-power mode that reduces the quiescent current to minimize power consumption during light load conditions.

  6. Q: Is TPS610994YFFR suitable for battery-powered applications? A: Yes, TPS610994YFFR is well-suited for battery-powered applications due to its low quiescent current and wide input voltage range.

  7. Q: Does TPS610994YFFR have built-in protection features? A: Yes, TPS610994YFFR includes overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  8. Q: Can TPS610994YFFR be used in automotive applications? A: Yes, TPS610994YFFR is qualified for automotive applications and meets the necessary standards.

  9. Q: What is the efficiency of TPS610994YFFR? A: The efficiency of TPS610994YFFR can reach up to 95% depending on the input and output voltage conditions.

  10. Q: Are there any evaluation boards or reference designs available for TPS610994YFFR? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement TPS610994YFFR in their applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.