Consulte las especificaciones para obtener detalles del producto.
XC6108C30AGR-G
Product Overview
Category
XC6108C30AGR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.0V
- Maximum Output Current: 100mA
- Low Dropout Voltage: 150mV (typical)
- Low Quiescent Current: 1.0μA (typical)
- High Ripple Rejection Ratio: 70dB (typical)
- Built-in Overcurrent Protection
- Built-in Thermal Shutdown Circuit
Package
XC6108C30AGR-G is available in a small SOT-25 package.
Essence
The essence of XC6108C30AGR-G is its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
XC6108C30AGR-G is typically sold in reels containing 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.0V
- Output Current: Up to 100mA
- Dropout Voltage: 150mV (typical)
- Quiescent Current: 1.0μA (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-25
Detailed Pin Configuration
XC6108C30AGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage Regulation: XC6108C30AGR-G ensures a stable output voltage of 3.0V regardless of input voltage fluctuations.
- Overcurrent Protection: The built-in overcurrent protection feature safeguards the circuit from excessive current flow.
- Thermal Shutdown Circuit: In case of excessive temperature, the thermal shutdown circuit activates to prevent damage to the device.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Low dropout voltage minimizes power loss.
- Low quiescent current ensures energy efficiency.
- High ripple rejection ratio provides a clean output signal.
- Built-in overcurrent protection enhances circuit safety.
- Thermal shutdown circuit prevents overheating.
Disadvantages
- Limited maximum output current (up to 100mA) may not be suitable for high-power applications.
Working Principles
XC6108C30AGR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal resistance to maintain a constant output voltage of 3.0V. The built-in overcurrent protection monitors the output current, while the thermal shutdown circuit protects the device from excessive temperature.
Detailed Application Field Plans
XC6108C30AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C30AGR-G are: - XC6201P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6222B332MR-G
These models offer similar voltage regulation capabilities and come in different package types to suit specific requirements.
Word count: 413 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de XC6108C30AGR-G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of XC6108C30AGR-G in technical solutions:
Question: What is XC6108C30AGR-G?
- Answer: XC6108C30AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6108C30AGR-G?
- Answer: The operating voltage range of XC6108C30AGR-G is typically between 0.9V and 6.0V.Question: What is the purpose of using XC6108C30AGR-G in a technical solution?
- Answer: XC6108C30AGR-G is commonly used to ensure stable operation of microcontrollers, digital circuits, and other electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.Question: How does XC6108C30AGR-G detect the power supply voltage?
- Answer: XC6108C30AGR-G uses an internal voltage reference and a comparator to monitor the power supply voltage. When the voltage drops below the specified threshold, it triggers the reset signal.Question: Can XC6108C30AGR-G be used with both positive and negative power supply voltages?
- Answer: No, XC6108C30AGR-G is designed to work with positive power supply voltages only.Question: What is the typical reset voltage threshold of XC6108C30AGR-G?
- Answer: The typical reset voltage threshold of XC6108C30AGR-G is 3.0V.Question: Is XC6108C30AGR-G suitable for battery-powered applications?
- Answer: Yes, XC6108C30AGR-G is commonly used in battery-powered applications as it helps prevent damage to electronic devices by providing a reset signal when the battery voltage drops below a certain level.Question: Can XC6108C30AGR-G be used in automotive applications?
- Answer: Yes, XC6108C30AGR-G is suitable for automotive applications as it can monitor the power supply voltage and provide a reset signal in case of voltage fluctuations or drops.Question: What is the typical quiescent current consumption of XC6108C30AGR-G?
- Answer: The typical quiescent current consumption of XC6108C30AGR-G is around 1.0µA.Question: Is XC6108C30AGR-G available in different package options?
- Answer: Yes, XC6108C30AGR-G is available in various package options, including SOT-25 and USP-4B.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.