Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
BYG10KHE3_A/H
Ver Detalle Hojas de datos

BYG10KHE3_A/H

Product Overview

Category: Semiconductor
Use: Rectifier Diode
Characteristics: High voltage, high current
Package: TO-220AC
Essence: Efficient power conversion
Packaging/Quantity: Bulk packaging, 100 pieces per pack

Specifications

  • Maximum Reverse Voltage: 1000V
  • Average Forward Current: 10A
  • Forward Voltage Drop: 1.1V at 5A
  • Reverse Recovery Time: 35ns

Detailed Pin Configuration

The BYG10KHE3_A/H rectifier diode has a standard TO-220AC package with three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (H)

Functional Features

  • High reverse voltage capability
  • Fast reverse recovery time
  • Low forward voltage drop
  • Suitable for high-frequency applications

Advantages and Disadvantages

Advantages: - High voltage and current ratings - Fast recovery time - Low forward voltage drop

Disadvantages: - Relatively large package size - Higher cost compared to standard diodes

Working Principles

The BYG10KHE3_A/H operates on the principle of rectification, allowing current to flow in only one direction. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts, allowing current to flow. In reverse bias, the diode blocks the current flow.

Detailed Application Field Plans

This rectifier diode is suitable for various applications including: - Power supplies - Motor drives - Inverters - Welding equipment - Battery chargers

Detailed and Complete Alternative Models

  • BYG20KHE3_A/H: Higher voltage rating
  • BYG30KHE3_A/H: Higher current rating
  • BYG10JHE3_A/H: Lower forward voltage drop

This completes the entry for BYG10KHE3_A/H, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de BYG10KHE3_A/H en soluciones técnicas

  1. What is BYG10KHE3_A/H?

    • BYG10KHE3_A/H is a high-efficiency, fast-recovery diode commonly used in power supply and rectifier applications.

  2. What are the key features of BYG10KHE3_A/H?

    • The key features of BYG10KHE3_A/H include low forward voltage drop, high surge current capability, and fast reverse recovery time.

  3. What are the typical applications of BYG10KHE3_A/H?

    • Typical applications of BYG10KHE3_A/H include switch-mode power supplies, freewheeling diodes, and reverse battery protection.

  4. What is the maximum forward voltage of BYG10KHE3_A/H?

    • The maximum forward voltage of BYG10KHE3_A/H is typically around 1.3V at a forward current of 10A.

  5. What is the reverse recovery time of BYG10KHE3_A/H?

    • The reverse recovery time of BYG10KHE3_A/H is typically in the range of 15-30 nanoseconds.

  6. What is the maximum junction temperature of BYG10KHE3_A/H?

    • The maximum junction temperature of BYG10KHE3_A/H is typically around 175°C.

  7. What is the package type of BYG10KHE3_A/H?

    • BYG10KHE3_A/H is commonly available in a surface-mount SOD-128 package.

  8. What are the recommended operating conditions for BYG10KHE3_A/H?

    • The recommended operating conditions for BYG10KHE3_A/H include a maximum forward current of 10A and a maximum reverse voltage of 1000V.

  9. What are the advantages of using BYG10KHE3_A/H in power supply designs?

    • The advantages of using BYG10KHE3_A/H include improved efficiency, reduced switching losses, and enhanced reliability in high-frequency applications.

  10. Where can I find detailed technical specifications for BYG10KHE3_A/H?

    • Detailed technical specifications for BYG10KHE3_A/H can be found in the product datasheet provided by the manufacturer or distributor.