Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
GP02-25HE3/54
Ver Detalle Hojas de datos

GP02-25HE3/54

Introduction

The GP02-25HE3/54 is a power rectifier diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Power Rectification
  • Characteristics: High Efficiency, Low Forward Voltage Drop
  • Package: TO-220AC
  • Essence: Efficient Power Conversion
  • Packaging/Quantity: Bulk Packaging, 50 Units per Pack

Specifications

  • Voltage Rating: 250V
  • Current Rating: 2A
  • Forward Voltage Drop: 1.1V at 1A
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The GP02-25HE3/54 follows the standard pin configuration for a TO-220AC package: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Not connected (Tab)

Functional Features

  • High Efficiency: The diode offers efficient power conversion, minimizing energy loss.
  • Fast Recovery Time: With a reverse recovery time of 35ns, it enables rapid switching applications.
  • Low Forward Voltage Drop: The diode exhibits a low forward voltage drop, reducing power dissipation.

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Fast Recovery Time
  • Low Forward Voltage Drop
  • Reliable Performance

Disadvantages

  • Limited Voltage and Current Ratings
  • Operating Temperature Restrictions

Working Principles

The GP02-25HE3/54 operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When forward-biased, it conducts current with minimal voltage drop, facilitating power rectification.

Detailed Application Field Plans

The GP02-25HE3/54 is suitable for various applications, including: - Switching Power Supplies - Rectification Circuits - Motor Drives - Inverters

Detailed and Complete Alternative Models

  • GP02-40: Higher Voltage Rating (400V)
  • GP02-10: Lower Current Rating (1A)
  • GP02-25HE3/45: Faster Recovery Time (25ns)

In summary, the GP02-25HE3/54 power rectifier diode offers high efficiency, fast recovery time, and low forward voltage drop, making it suitable for diverse power conversion applications.

[Word Count: 348]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de GP02-25HE3/54 en soluciones técnicas

  1. What is the GP02-25HE3/54?

    • The GP02-25HE3/54 is a high-efficiency, low-power consumption power operational amplifier designed for various technical solutions.

  2. What are the key features of the GP02-25HE3/54?

    • The GP02-25HE3/54 features low input bias current, low offset voltage, and wide bandwidth, making it suitable for precision applications.

  3. What are the typical applications of the GP02-25HE3/54?

    • Typical applications include sensor interfaces, signal conditioning, and low-power instrumentation.

  4. What is the supply voltage range for the GP02-25HE3/54?

    • The supply voltage range for the GP02-25HE3/54 is typically between 2.7V to 5.5V.

  5. What is the input bias current of the GP02-25HE3/54?

    • The input bias current is typically in the range of 1pA, making it suitable for low-power applications.

  6. Does the GP02-25HE3/54 have thermal shutdown protection?

    • Yes, the GP02-25HE3/54 is equipped with thermal shutdown protection to prevent overheating.

  7. What is the maximum output current of the GP02-25HE3/54?

    • The maximum output current is typically around 20mA, allowing it to drive small loads directly.

  8. Is the GP02-25HE3/54 suitable for battery-powered applications?

    • Yes, the low-power consumption and wide supply voltage range make it well-suited for battery-powered applications.

  9. What is the temperature range for the GP02-25HE3/54?

    • The GP02-25HE3/54 typically operates within a temperature range of -40°C to 125°C.

  10. Can the GP02-25HE3/54 be used in automotive applications?

    • Yes, the GP02-25HE3/54 is often used in automotive systems due to its wide operating temperature range and low-power characteristics.