Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
GP02-40-E3/53
Ver Detalle Hojas de datos

GP02-40-E3/53

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 50 units per pack

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 2.5V to 37V
  • Dropout Voltage: 0.5V at 3A
  • Maximum Output Current: 3A
  • Line Regulation: 0.01% typical
  • Load Regulation: 0.1% typical
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Input
  2. Ground
  3. Output

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Reverse Battery Protection
  • Short Circuit Protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Low dropout voltage - High efficiency - Built-in protection features

Disadvantages: - Higher cost compared to traditional linear regulators - Requires heat sink for high current applications

Working Principles

The GP02-40-E3/53 is a voltage regulator that uses a control loop to maintain a constant output voltage despite changes in the input voltage or load. It utilizes a reference voltage and feedback mechanism to adjust the output voltage as needed.

Detailed Application Field Plans

The GP02-40-E3/53 is commonly used in various electronic devices such as: - Power supplies - Automotive electronics - Industrial equipment - Battery-powered devices

Detailed and Complete Alternative Models

  • LM317: Similar adjustable voltage regulator with lower maximum output current
  • LM2940: Fixed output voltage regulator with similar characteristics

In conclusion, the GP02-40-E3/53 is a versatile voltage regulator with a wide input voltage range and built-in protection features, making it suitable for a variety of electronic applications.

[Word Count: 275]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de GP02-40-E3/53 en soluciones técnicas

  1. What is the GP02-40-E3/53 used for in technical solutions?

    • The GP02-40-E3/53 is commonly used as a pressure sensor in various technical solutions to measure and monitor pressure levels.

  2. What is the operating range of the GP02-40-E3/53?

    • The operating range of the GP02-40-E3/53 is typically between 0 to 40 bar.

  3. Is the GP02-40-E3/53 suitable for use in harsh environments?

    • Yes, the GP02-40-E3/53 is designed to withstand harsh environments and is often used in industrial applications.

  4. What type of output signal does the GP02-40-E3/53 provide?

    • The GP02-40-E3/53 typically provides a 4-20mA output signal, making it compatible with many control systems.

  5. Can the GP02-40-E3/53 be used for measuring liquid pressure?

    • Yes, the GP02-40-E3/53 can be used to measure the pressure of liquids as well as gases.

  6. What are the typical installation requirements for the GP02-40-E3/53?

    • The GP02-40-E3/53 is usually installed using standard threaded connections and requires proper sealing to prevent leaks.

  7. Does the GP02-40-E3/53 require calibration?

    • Yes, the GP02-40-E3/53 should be calibrated periodically to ensure accurate pressure measurements.

  8. What is the temperature range for the GP02-40-E3/53?

    • The GP02-40-E3/53 is designed to operate within a temperature range of -20°C to 85°C.

  9. Can the GP02-40-E3/53 be used in mobile equipment applications?

    • Yes, the GP02-40-E3/53 is suitable for use in mobile equipment such as hydraulic systems and vehicles.

  10. Are there any special considerations for wiring the GP02-40-E3/53?

    • It's important to follow the manufacturer's guidelines for wiring the GP02-40-E3/53 to ensure proper functionality and safety.