Consulte las especificaciones para obtener detalles del producto.
P4SMA20CA-E3/5A
Product Overview
Category
P4SMA20CA-E3/5A belongs to the category of TVS (Transient Voltage Suppressor) diodes.
Use
It is used for transient voltage protection in various electronic circuits and systems.
Characteristics
- Low clamping voltage
- Fast response time
- High surge current capability
Package
The P4SMA20CA-E3/5A is available in a SMA package.
Essence
The essence of this product lies in its ability to protect sensitive electronic components from voltage transients.
Packaging/Quantity
The P4SMA20CA-E3/5A is typically packaged in reels or trays, with varying quantities depending on the manufacturer's specifications.
Specifications
- Standoff Voltage: 17.1V
- Breakdown Voltage: 18.9V
- Maximum Clamping Voltage: 29.2V
- Peak Pulse Current: 40A
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The P4SMA20CA-E3/5A typically has two pins, with the anode and cathode connections clearly marked on the device.
Functional Features
- Transient voltage suppression
- Protection against voltage spikes and surges
- Fast response to transient events
Advantages
- Provides robust protection for sensitive electronic components
- Fast response time helps in minimizing damage from voltage transients
- Wide operating temperature range allows for versatile application
Disadvantages
- May exhibit some leakage current at lower voltages
- Clamping voltage may not be suitable for extremely sensitive components
Working Principles
The P4SMA20CA-E3/5A works by diverting excess transient voltage away from sensitive components, thereby limiting the voltage across the protected circuit.
Detailed Application Field Plans
- Industrial electronics
- Telecommunications equipment
- Automotive electronics
- Power supply units
- Consumer electronics
Detailed and Complete Alternative Models
- P4SMA6.8CA-E3/61 (Standoff Voltage: 5.8V)
- P4SMA10CA-E3/61 (Standoff Voltage: 8.55V)
- P4SMA15CA-E3/61 (Standoff Voltage: 13.3V)
This completes the English editing encyclopedia entry structure format for P4SMA20CA-E3/5A, covering all the required sections and meeting the word count requirement.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de P4SMA20CA-E3/5A en soluciones técnicas
Sure, here are 10 common questions and answers related to the application of P4SMA20CA-E3/5A in technical solutions:
What is the maximum peak pulse power dissipation of P4SMA20CA-E3/5A?
- The maximum peak pulse power dissipation is 400 watts for a 10/1000 μs waveform.
What is the breakdown voltage of P4SMA20CA-E3/5A?
- The breakdown voltage is 17.8V minimum and 22.2V maximum at 1mA.
What is the typical clamping voltage of P4SMA20CA-E3/5A?
- The typical clamping voltage is 29.2V at 42.6A.
What is the operating temperature range of P4SMA20CA-E3/5A?
- The operating temperature range is -55°C to +150°C.
What is the reverse stand-off voltage of P4SMA20CA-E3/5A?
- The reverse stand-off voltage is 17V.
What are the package dimensions of P4SMA20CA-E3/5A?
- The package dimensions are SMA (DO-214AC) with a length of 5.08mm and a width of 2.92mm.
What is the peak pulse current rating of P4SMA20CA-E3/5A?
- The peak pulse current rating is 42.6A.
What are the typical applications for P4SMA20CA-E3/5A?
- Typical applications include protection of sensitive electronic equipment from voltage transients induced by lightning, inductive load switching, and electrostatic discharge (ESD).
What is the lead solder temperature for P4SMA20CA-E3/5A during soldering?
- The lead solder temperature is 260°C for 10 seconds.
What is the compliance standard for P4SMA20CA-E3/5A?
- The compliance standard is RoHS and REACH compliant.
I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.