Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
VS-25TTS12STRL-M3
Ver Detalle Hojas de datos

VS-25TTS12STRL-M3

Introduction

The VS-25TTS12STRL-M3 is a semiconductor device belonging to the category of Thyristors. This component is widely used in various applications due to its specific characteristics and functional features.

Basic Information Overview

  • Category: Thyristor
  • Use: Power control and switching in electronic circuits
  • Characteristics: High current and voltage handling capability, low power loss, fast switching speed
  • Package: TO-220AB
  • Essence: Efficient power control and regulation
  • Packaging/Quantity: Typically packaged individually

Specifications

  • Voltage Rating: 1200V
  • Current Rating: 25A
  • Gate Trigger Current: 100mA
  • Gate Trigger Voltage: 1.5V
  • On-State Voltage: 1.7V
  • Repetitive Peak Off-State Voltage: 1200V
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VS-25TTS12STRL-M3 has a standard TO-220AB package with three leads: Anode, Cathode, and Gate.

Functional Features

  • Fast switching speed
  • Low power dissipation
  • High surge current capability
  • High reliability

Advantages and Disadvantages

Advantages

  • Efficient power control
  • Fast response time
  • High current and voltage handling capability

Disadvantages

  • Sensitive to voltage transients
  • Requires careful heat management

Working Principles

The VS-25TTS12STRL-M3 operates based on the principle of controlling the flow of electric current by using a small gate current to trigger the device into conduction. Once triggered, it remains conducting until the current through it drops below a certain threshold.

Detailed Application Field Plans

The VS-25TTS12STRL-M3 finds extensive use in various applications such as: - AC motor drives - Uninterruptible power supplies (UPS) - Power factor correction circuits - Solid-state relays

Detailed and Complete Alternative Models

Some alternative models to the VS-25TTS12STRL-M3 include: - MCR22-6 - C106D - MAC97A6

In conclusion, the VS-25TTS12STRL-M3 is a versatile thyristor with high current and voltage handling capabilities, making it suitable for a wide range of power control and switching applications.

[Word Count: 320]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de VS-25TTS12STRL-M3 en soluciones técnicas

Sure, here are 10 common questions and answers related to the application of VS-25TTS12STRL-M3 in technical solutions:

  1. What is the maximum voltage rating of the VS-25TTS12STRL-M3?

    • The maximum voltage rating of the VS-25TTS12STRL-M3 is 1200V.

  2. What is the maximum current rating of the VS-25TTS12STRL-M3?

    • The maximum current rating of the VS-25TTS12STRL-M3 is 25A.

  3. What type of package does the VS-25TTS12STRL-M3 come in?

    • The VS-25TTS12STRL-M3 comes in a TO-220AB package.

  4. What are the typical applications for the VS-25TTS12STRL-M3?

    • The VS-25TTS12STRL-M3 is commonly used in AC motor control, industrial heating, and power supply applications.

  5. What is the forward voltage drop of the VS-25TTS12STRL-M3 at its rated current?

    • The forward voltage drop of the VS-25TTS12STRL-M3 at its rated current is typically 1.6V.

  6. Does the VS-25TTS12STRL-M3 require a heatsink for operation?

    • Yes, it is recommended to use a heatsink when operating the VS-25TTS12STRL-M3 to ensure proper thermal management.

  7. What is the maximum junction temperature of the VS-25TTS12STRL-M3?

    • The maximum junction temperature of the VS-25TTS12STRL-M3 is 150°C.

  8. Is the VS-25TTS12STRL-M3 suitable for high-frequency switching applications?

    • No, the VS-25TTS12STRL-M3 is not recommended for high-frequency switching due to its recovery time.

  9. Can the VS-25TTS12STRL-M3 be used in parallel for higher current applications?

    • Yes, the VS-25TTS12STRL-M3 can be used in parallel to increase the current handling capability.

  10. What are the key advantages of using the VS-25TTS12STRL-M3 in technical solutions?

    • The key advantages of using the VS-25TTS12STRL-M3 include its high voltage and current ratings, ruggedness, and suitability for various power control applications.

I hope these questions and answers are helpful for your technical solutions involving the VS-25TTS12STRL-M3. Let me know if you need further assistance!