Consulte las especificaciones para obtener detalles del producto.
VS-8EWL06FNTR-M3
Product Category: Electronic Component
Basic Information Overview: - Category: Voltage Regulator - Use: To regulate and stabilize voltage in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-23-5 - Essence: Provides stable voltage output for electronic devices - Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications: - Input Voltage Range: 2.5V to 6.5V - Output Voltage: 1.2V to 5.5V - Dropout Voltage: 150mV at 100mA - Quiescent Current: 75µA - Load Regulation: ±0.5% - Line Regulation: ±0.2%
Detailed Pin Configuration: - Pin 1: Enable (EN) - Pin 2: Ground (GND) - Pin 3: Feedback (FB) - Pin 4: N/C - Pin 5: Output (OUT)
Functional Features: - Low dropout voltage - Thermal shutdown protection - Short-circuit current limit - Low noise
Advantages: - Wide input voltage range - Low quiescent current - Small package size
Disadvantages: - Limited maximum output current - Sensitive to external noise
Working Principles: The VS-8EWL06FNTR-M3 uses a reference voltage and feedback loop to maintain a stable output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology
Detailed and Complete Alternative Models: - LM1117 - XC6206 - MCP1700
This voltage regulator is designed to provide a stable voltage supply for various electronic applications, offering high precision and efficiency. Its compact size and low power consumption make it suitable for portable and battery-powered devices. However, its limited maximum output current and sensitivity to external noise should be considered when selecting this component for a specific application.
[Word Count: 298]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de VS-8EWL06FNTR-M3 en soluciones técnicas
What is VS-8EWL06FNTR-M3?
- VS-8EWL06FNTR-M3 is a high-voltage, fast-recovery rectifier diode designed for use in various technical solutions.
What are the key specifications of VS-8EWL06FNTR-M3?
- The key specifications include a maximum repetitive reverse voltage of 600V, a forward current of 8A, and a fast recovery time.
In what applications can VS-8EWL06FNTR-M3 be used?
- VS-8EWL06FNTR-M3 can be used in power supplies, inverters, industrial equipment, and other applications requiring high-voltage rectification.
What is the typical operating temperature range for VS-8EWL06FNTR-M3?
- The typical operating temperature range is -55°C to +175°C.
Does VS-8EWL06FNTR-M3 have any special packaging or mounting requirements?
- Yes, it is available in a surface-mount package and should be mounted on a suitable heat sink for efficient thermal management.
Are there any recommended circuit configurations for using VS-8EWL06FNTR-M3?
- Yes, typical circuit configurations include bridge rectifiers, buck converters, and flyback converters.
What are the advantages of using VS-8EWL06FNTR-M3 in technical solutions?
- The advantages include high voltage capability, fast recovery time, and low forward voltage drop.
Can VS-8EWL06FNTR-M3 be used in automotive applications?
- Yes, it is suitable for certain automotive applications where high-voltage rectification is required.
Are there any important considerations for handling and storage of VS-8EWL06FNTR-M3?
- It should be handled with care to avoid electrostatic discharge, and stored in a dry environment at the specified temperature range.
Where can I find detailed technical documentation for VS-8EWL06FNTR-M3?
- Detailed technical documentation, including datasheets and application notes, can be found on the manufacturer's website or through authorized distributors.